Ensure that the water temperature in the hydraulic network at the
installation site is within the range of 0 to 35°C (32 to 95°F)to
prevent damage.
Do not force the lid and seat closed. Both items have the Slow
Close system for gentle closing.
If the ambient temperature is below 0°C (32°F), drain the water
from the tank after use to prevent freezing.
If the product will not be used for more than 3 days, remove the
water from the tank.
Do not pour water directly onto the LED area. (Single Wash)
Do not install this product in places with high humidity and vapors,
such as saunas. (Single Wash)
PRODUCT SPECIFICATIONS
SINGLE BASIC / WASH versions
Minimum water inlet pressure: 30 kPa (3 m.c.a.)
Maximum water inlet pressure: 400 kPa (40 m.c.a.)
SEAT / LID
Slow Close: technology that ensures a gentle closing of the lid and
seat.
Easy Clean: system that allows the seat to be easily removed to
clean the basin and seat.
SINGLE WASH version
Built in hygienic shower with gradual pressure adjustment.
Night Light that activates automatically in the absence of light
(below 50 lumens) and an acoustic signal of approximately 50
decibels.
Two AAA batteries (not included in the product).
3
Need help?
Do you have a question about the SINGLE BASIC and is the answer not in the manual?
Questions and answers