Compaq dc5850 - Microtower PC Hardware Reference Manual page 46

Table A-1 Specifications (continued)
Rated Line Frequency
Power Output
Rated Input Current (maximum)
Standard PS
80 Plus PS
1 This system utilizes a passive power factor corrected power supply. The power factor correction is present in the 230V
operating mode only. This allows the system to pass the CE mark requirements for use in the countries of the European Union.
This supply requires the use of an input voltage range select switch. The 80 Plus power supply utilizes an active power factor
corrected power supply. This allows the system to pass the CE mark requirements for use in the countries of the European
Union. The active power factor corrected power supply also has the added benefit of not requiring an input voltage range
select switch.
40 Appendix A Specifications
1
50-60 Hz 50-60 Hz
300 W 300 W
8A @ 100 VAC 4A @ 200 VAC
4A @ 100VAC 2A @ 200VAC
ENWW