Compaq dc5850 - Microtower PC Hardware Reference Manual page 24

Hardware reference guide - dc5850 microtower models

Hide thumbs Also See for dc5850 - Microtower PC:

Table of Contents

Locate the correct vacant expansion socket on the system board and the corresponding expansion

slot on the back of the computer chassis.

On the rear of the computer, a slot cover lock secures the expansion card brackets and expansion

slot covers in place. Lift up on the tab at the top of the lock and rotate the lock open.

Figure 2-8

Before installing an expansion card, remove the expansion slot cover or the existing expansion

card.

NOTE:

to the expansion card.

If you are installing an expansion card in a vacant socket, remove the appropriate expansion

slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside

of the chassis.

Figure 2-9

Chapter 2 Hardware Upgrades

Opening the Slot Cover Lock

Before removing an installed expansion card, disconnect any cables that may be attached

Removing an Expansion Slot Cover

ENWW

Table of Contents

5850 - deskjet color inkjet printer