Advertisement

Quick Links

True Manufacturing Co., Inc.
TBR72-RISZ1-L-S-GGG
TBR72-RISZ1-L-B-111-1
Be sure to read and fully understand
before installing, operating, maintaining or servicing
this appliance. Failure to do so can result in appliance
failure, property damage, serious injury or death.
Appliance failure, injury or property damage due to
improper installation is not covered by warranty.
True Manufacturing Co., Inc.
2001 East Terra Lane • O'Fallon, Missouri 63366-4434
(636) 240-2400 • FAX: (636)-272-2408
International FAX: (636)-272-7546 • (800)-325-6152
Parts Department: (800)-424-TRUE (424-8783)
Parts Department FAX: (636)-272-9471
North America – Canada and Caribbean
Warranty Phone +1 855-878-9277
Warranty Fax +1 636-980-8510
Warranty Email warrantyinquiries@truemfg.com
Technical Phone +1 855-372-1368
Technical Email service@truemfg.com
7:00 am–6:00 pm CST Monday–Friday,
8:00 am–12:00 pm Saturday
TEC_TM_043 | REV. I | EN
WARNING!
this document
Mexico
Phone +52 555-804-6343/44
service-mexicocity@truemfg.com
9:00 am–5:30 pm M–F
Latin America
Phone: +52 555-804-6343/44
servicelatam@truemfg.com
9:00 am–5:30 pm M–F
INSTALLATION MANUAL
EBR
|
EDR
TDR48-RISZ1-L-B-SG
TRUE tracks the history of your appliance
For easy reference, record your appliances full model name and
serial number below. This information is on your serial label.
Serial label location varies by appliance.
Model Name:
Serial Number:
INSTALLATION MANUAL
EBR
|
UK, Ireland, Middle East,
Africa & India
Phone: +44 (0) 800-783-2049
Service-emea@truemfg.com
8:30 am–5:00 pm M–F
Australia
Phone: +61 2-9618-9999
service-aus@truemfg.com
8:30 am–5:00 pm M–F
09/10/2024
|
TBR
|
TDR SERIES
TBR32-RISZ1-L-B-S-1
USER ACTION!
by its serial number.
EDR
TBR
TDR SERIES
|
|
Original Instructions
European Union & Commonwealth
of Independent States
Phone: +41 61-563-0705
service-emea@truemfg.com
8:00 am–5:00 pm M–F

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EBR Series and is the answer not in the manual?

Questions and answers

Summary of Contents for True EBR Series

  • Page 1 USER ACTION! WARNING! this document Be sure to read and fully understand TRUE tracks the history of your appliance by its serial number. before installing, operating, maintaining or servicing For easy reference, record your appliances full model name and this appliance. Failure to do so can result in appliance serial number below.
  • Page 2: Table Of Contents

    F O R YO U R PU R C H A S E Congratulations! The primary purpose of this document is to assist the installation, maintenance, and servicing of your TRUE appliance. This document contains information important to safety, operation, maintenance, and servicing. DO NOT discard this document.
  • Page 3: Preface

    The warning, guidelines, and recommendations within this document are meant to prevent appliance damage, property damage, injury, or death. Please carefully read all warnings, guidelines, and recommendations before proceeding to ensure the continued safe use and maintenance of your TRUE appliance. Signal & Symbol Definitions Below are symbols you may see in this document.
  • Page 4: Important Safety Information

    Service Company Locator at truemfg.com/support/ service-locator. TRUE is solely the appliance manufacturer and is not responsible for installation. • This appliance is not to be used, cleaned, or maintained by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, without proper supervision or instruction concerning the appliance by a person responsible for their safety.
  • Page 5: Personal Injury Warnings

    Only qualified technicians should install and service the appliance. For assistance locating a refrigeration service technician in your area for installation, servicing or maintenance, please visit our Service Company Locator at truemfg.com/support/service-locator. TRUE is solely the appliance manufacturer and is not responsible for installation.
  • Page 6: Appliance Disposal Warnings

    DO NOT dispose of your appliance with household waste. Hydrocarbon Refrigerant Warnings TRUE appliances use hydrocarbon refrigerant (R-290/513A/600a). Check the serial label to identify the appliance's refrigerant. Serial label location varies by model. DANGER! Risk of fire or explosion! Flammable refrigerant used.
  • Page 7: Electrical Safety Warnings

    • Before connecting the appliance to the power supply, verify the power supply is correctly grounded. If the power supply is not grounded, correct immediately. TRUE recommends hiring a qualified electrician to inspect the wall outlet and circuit to ensure they are properly grounded.
  • Page 8: About Your Appliance & Installation Requirements

    Service Company Locator at truemfg.com/support/service- • DO NOT use extension cords or adapter plugs. locator. TRUE is solely the appliance manufacturer and is not responsible for installation. • Before connecting your appliance to the power supply, verify the incoming voltage (±5%) and the amps match the The appliance owner is responsible for proper installation and operation ratings on the appliance's serial label.
  • Page 9: Clearances

    EBR/EDR/ TBR/TDR truemfg.com About Your Appliance & Installation Requirements (cont.) Clearances NOTICE! Warranty is void if ventilation is insufficient. Be sure your appliance has the required surrounding clearances for ventilation purposes. Keep all ventilation openings in the appliance enclosure or structure housing the appliance clear of obstruction.
  • Page 10: Electrical Requirements

    Plug Configurations" below. AMPS NEMA Plug Configurations 60 HZ USE ONLY! TRUE uses these types of NEMA plugs shown. If you DO NOT have the proper outlet, have a licensed electrician verify and install the correct power source. International (IEC) Plugs Only International appliances may be supplied with a power cord that will require installation.
  • Page 11 EBR/EDR/ TBR/TDR truemfg.com NOTES TEC_TM_043 | REV. I | EN 09/10/2024 Page 11 of 56...
  • Page 12: Installation And Setup

    Unplug the appliance or disconnect with the delivery freight carrier, and contact power before installation or servicing. TRUE. DO NOT install the appliance or put it in service. • If the appliance is laid on its back or side, be sure...
  • Page 13 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Procedure 1. Remove the outer packaging (cardboard and bubbles or styrofoam corners and clear plastic). See fig. 1. Inspect for concealed damage. Again, immediately file a claim with the freight carrier if there is damage. NOTICE ›...
  • Page 14: Appliance Location

    EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Appliance Location Procedure – Leveling Screws If leveling screws are not factory installed, then, with access to the • Ensure that the drain hose or hoses are positioned in the pan. appliance bottom, install the leveling screws into the threaded holes in the frame rail or appliance bottom.
  • Page 15 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Installation & Setup (cont.) Procedure – 6" (152 mm) Leveling Legs Procedure – Castors 1. Locate the castor anchor points on the underside of the 1. Access the appliance bottom. appliance. 2. If present, remove the leveling screws. 2.
  • Page 16: Level The Appliance

    Proper leveling of your TRUE appliance is critical to operating The following procedure describes sealing a non-mobile appliance success (for non-mobile appliances). Leveling impacts effective to the floor for NSF standards of proper sanitary operation.
  • Page 17: Shelf Installation

    EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Shelf Installation WARNING! Overloading, incorrectly installing, or improperly can cause loading shelves shelf failure and negatively affect appliance operation, resulting in appliance damage, Fig. 1. Installing top tab of shelf clip. Fig. 2. The bottom tab of the shelf clip product damage, or personal injury.
  • Page 18: Draft Tower Installation

    EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Draft Tower Installation Procedure 1. Position the rubber washer (see fig. 1) over the mounting holes in the cabinet countertop. 2. Thread the beer line connector (see fig. 2) to the draft arm. See fig.
  • Page 19: Draft Spill Tray

    EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Parts Key Spill Tray Grate Spill Tray Tray Gasket Spill Tray Access Port Draft Spill Tray Procedure 1. Place the tray gasket over the spill tray tube. 2. Slide the spill tray tube into the spill tray access port. 3.
  • Page 20: Air Distributor Manifold & Distributor Cover

    NOTICE › CO2 cylinders, regulators, and keg tappers are not provided by TRUE. Required Tools Required tools include (but may not be limited to) the following: • CO2 Cylinder • Pressure Regulator •...
  • Page 21: Beer Drain Bottle & Hanger

    EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Beer Drain Bottle & Hanger Access Ports An optional beer drain bottle and hanger may be purchased to Access ports provide optional locations to route external beer lines, collect the overflow from the draft spill tray. The bottle hanger CO₂...
  • Page 22 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Access Ports (cont.) DRILL ZONES* – No drilling allowed on any face with doors! Access ports are available for purchase to plug drilled holes. *Applies to all sizes. 3-door model shown. NO DRILLING ALLOWED Mirror dimensions for right-hand cooling systems CONDENSING UNIT SIDE VIEW NON-CONDENSING UNIT SIDE VIEW...
  • Page 23: Overlay Panel Specifications

    EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) 05/24/22 Overlay Panel Specifications For panel installation instructions, see “Overlay Panel Installation” on (pg. 27). Slotted Grill F R O N T BAC K 11 19/32" 11 19/32" 294mm 294mm 31/32" 9 11/16" 3/4"...
  • Page 24 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Overlay Panel Specifications (cont.) For panel installation instructions, see “Overlay Panel Installation” on (pg. 27). EBR | EDR | TBR | TDR–48 Glass Door Panel Specifications Solid Door Panel Specifications Width 17-5/8" (448 mm) Width 17-5/8"...
  • Page 25 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Overlay Panel Specifications (cont.) For panel installation instructions, see “Overlay Panel Installation” on (pg. 27). EBR | EDR | TBR | TDR–32/52/72/92 Glass Door Panel Specifications Solid Door Panel Specifications Width 19-5/8" (498 mm) Width 19-5/8"...
  • Page 26 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Overlay Panel Specifications (cont.) For panel installation instructions, see “Overlay Panel Installation” on (pg. 27). EBR | EDR | TBR | TDR–36/60/84/108 Glass Door Panel Specifications Solid Door Panel Specifications Width 23-5/8" (600 mm) Width 23-5/8"...
  • Page 27: Overlay Panel Installation

    EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Overlay Panel Installation NOTICE! Take care to not damage the panel finish! This instruction demonstrates using cardboard from the unit’s exterior packaging for surface protection. Recommended panel thickness is 3/4" (19.05 mm). Required Tool(s) Fig.
  • Page 28 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Overlay Panel Installation (cont.) Procedure (cont.) 5. Clamp the door and panel. See fig. 6. NOTICE › If the clamp jaws are not padded, insert padding between the clamp and the overlay to protect the panel’s finish.
  • Page 29 EBR/EDR/ TBR/TDR truemfg.com Installation & Setup (cont.) Fig. 10. Handle screw locations. Fig. 11. Installed door handles. Fig. 12. Pull the side of the gasket to check its installation. CORRECT; gasket channel is NOT visible. INCORRECT; gasket channel is visible. TEC_TM_043 | REV.
  • Page 30: Appliance Operation

    • The compressor is ready to operate when the appliance is purchased. All you need to do is plug in the appliance. • Good air flow inside your TRUE appliance is critical. Take care to prevent product from pressing against the sides or back wall and coming within 4"...
  • Page 31: Temperature Control & Light Switch Location

    EBR/EDR/ TBR/TDR truemfg.com Appliance Operation (cont.) Temperature Control & Light Switch Location The light symbol shows the approximate location of the light switch. Factory Installed TruLumina LED To change the display color of the TruLumina LEDs, toggle the light switch off and then on. Repeat to cycle trough all available colors. Leaving the light switch in the "off"...
  • Page 32: General Sequence Of Operation

    EBR/EDR/ TBR/TDR truemfg.com Appliance Operation (cont.) General Sequence of Operation — Refrigerators & Freezers USER ACTION! regarding an appliance's temperature control adjustment or general sequence of operation, For more information please see our Temperature Control Adjustment—Sequence of Operation Manual in our resource library at or scan the truemfg.com/support/manuals/#panel4 code.
  • Page 33 EBR/EDR/ TBR/TDR truemfg.com Appliance Operation (cont.) General Sequence of Operation — Refrigerators & Freezers (cont.) When the appliance is in defrost mode… 1. Every appliance requires a defrost event to ensure the evaporator coil remains clear of frost and ice buildup. 2.
  • Page 34: Draft Beer Storage, Handling & Operation

    EBR/EDR/ TBR/TDR truemfg.com Appliance Operation (cont.) Draft Beer Storage, Handling & Operation DRAFT BEER SHOULD BE TREATED AS A FOOD PRODUCT. Pressure Dispensing pressures differ based on the following: In most instances draft beer is not pasteurized. It is very important that you store and handle it properly.
  • Page 35: Changing Co₂ Gas Cylinder

    EBR/EDR/ TBR/TDR truemfg.com Appliance Operation (cont.) Changing CO₂ Gas Cylinder Pressure Adjustment on CO₂ Regulator WARNING! WARNING! Take care when handling Take care when handling Contents under pressure. Contents under pressure. filled CO₂ tanks. If unfamiliar with using CO₂ tanks filled CO₂...
  • Page 36: Maintenance And Servicing

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing Maintenance & Servicing DANGER! WARNING! Sharp Edges! Risk of electric shock or burn! • Take care when moving, installing, cleaning, • Powering off an electronic control or setting servicing, and maintaining the appliance to avoid temperature controls to the 0 (off) position cuts.
  • Page 37: Component Replacement

    (OEM) components such as those Fig. 1. Example of OEM parts. shown in fig. 1. OEM parts minimize the risk of possible ignition due to incorrect parts. Use of non-OEM components may void TRUE's warranty. • service your Have a licensed service provider...
  • Page 38: Recommended Maintenance

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Recommended Maintenance See recommended maintenance tasks and frequencies below. Some tasks may be required more frequently based on your installation. Maintenance Tasks Monthly Quarterly Annually Verify the appliance maintains product temperature. Inspect power cord for damage; if damaged, replace immediately. Verify the power cord is fully plugged into the wall receptacle Inspect the overall condition of the appliance and its components (such as castors, doors, and hinges).
  • Page 39 EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Model: Serial Number: Jan. Feb. Mar. Apr. Jun. Jul. Aug. Sep. Oct. Nov. Dec. TEC_TM_043 | REV. I | EN 09/10/2024 Page 39 of 56...
  • Page 40: Draft Tower Cleaning

    Regardless of design, draft dispensers must be cleaned regularly. Flushing the draft dispenser with only water is not enough to maintain cleanliness. True recommends cleaning the draught dispenser whenever changing to a fresh keg. Clean dispensers ensure your draft beer will be at its best when served.
  • Page 41: Condenser Coil Cleaning

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Condenser Coil Cleaning Required Tools DANGER! Required tools include (but may not be limited to) the following: • 1/4" nut driver Risk of electric shock or burn! • Unplug the appliance or disconnect power before •...
  • Page 42 EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Condenser Coil Cleaning (cont.) Fig. 1. Louver grill screw location. Fig. 2. Pull the grill forward before lifting up. Fig. 3. Fig. 4. Never brush across the coil fins. Verify all blockages have been removed. Fig.
  • Page 43: General Surface Care & Cleaning

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) General Surface Care & Cleaning Gaskets DANGER! • Clean gaskets with warm soapy water. Risk of electric shock or fire! • DO NOT use sharp tools or knives to scrape a gasket. • clean appliance with a pressure washer DO NOT •...
  • Page 44: Stainless Steel Care & Cleaning

    Stainless steel cleaners must be free of phosphates, chlorine, chloride, and ammonia. use any steel wool, abrasive, or chlorine- DO NOT based products to clean stainless steel surfaces. True offers environmentally-friendly cleaner and polish through our True Store at store.trueresidential.com/products/ stainless-steel-clean-polish-kit. Stainless Steel Opponents...
  • Page 45: Tips To Help Prevent Rust On Stainless Steel

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) 8 Tips to Help Prevent Rust on Stainless Steel Maintain the Cleanliness of Your Equipment Rinse Avoid build-up of hard stains by cleaning frequently. Use When using chlorinated cleaners, you must rinse and wipe dry cleaners at the recommended strength (alkaline chlorinated or immediately.
  • Page 46: Reverse Door Swing Style #1

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Reverse Door Swing Style #1 WARNING! Doors are heavy. Be prepared Crush or cut hazard! to support the door's weight. Do not lift or support the door by the handle. Kit Contents (shipped with appliance) Fig.
  • Page 47 EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Reverse Door Swing (cont.) 1. Remove all door hardware except the door handle (see figs. 4a and 4b). Set the door brackets aside. NOTICE › The door brackets are the only hardware that will be relocated. All other hardware is new and included in the kit.
  • Page 48: Reverse Door Swing Style #2

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Reverse Door Swing Style #2 WARNING! Doors are heavy. Be prepared Crush or cut hazard! to support the door's weight. Do not lift or support the door by the handle. Fig. 1. Remove the bolts securing the top hinge brackets. Kit Contents (shipped with appliance) •...
  • Page 49: Slide Door Removal

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Slide Door Removal WARNING! Doors are heavy. Be prepared Crush or cut hazard! to support the door's weight. Do not lift or support the door by the handle. USER ACTION • use the side latch before removing DO NOT the slide door.
  • Page 50 EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Slide Door Removal (cont.) 1. Remove the door cord from the roller bracket. See figs. 5 and 6. NOTICE › The black plastic tab holding the door cord slides out the back. 2. Let the door cord slowly retract back into the door side channel.
  • Page 51: Slide Door Adjustment

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Slide Door Adjustment Slide Door Hold-Open Feature Only adjust the appliances after it has been installed in its final The hold-open feature keeps the door in the open position. location and correctly leveled. Procedure Procedure 1.
  • Page 52: Gasket Replacement

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Gasket Replacement Tools Required • Caulk gun • Black 100% silicone There are two types of door gaskets; narrow and wide gaskets (see fig 1). The correct gasket for your unit varies by appliance age and model.
  • Page 53: Swing Door Lock & Cam Replacement

    EBR/EDR/ TBR/TDR truemfg.com Maintenance & Servicing (cont.) Swing Door Lock & Cam Replacement The door must be open prior to proceeding. Procedure — Removing Components 1. Insert the master key (included with the replacement lock kit) into the lock cylinder. 2.
  • Page 54: Warranty Information

    EBR/EDR/ TBR/TDR truemfg.com Warranty Information (USA & Canada Only) Warranty Information To view and download the Warranty Information for USA & Canada, please scan the QR code below. Page 54 of 56 09/10/2024 P#803294 TEC_TM_043 | REV. I | EN...
  • Page 55 EBR/EDR/ TBR/TDR truemfg.com NOTES TEC_TM_043 | REV. I | EN 09/10/2024 Page 55 of 56...
  • Page 56 truemfg.com ST_238132_8.24 09/10/2024 P#803294 TEC_TM_043 | REV. I | EN...

Table of Contents