REDGUM Brand RG5930 User Manual

450mm
HANDI
Grab Rail
RG5945
300mm
HANDI
Grab Rail
RG5930
Thank you for purchasing this REDGUM Brand product. If you have any issues or questions about the HANDI Grab Rail please contact your supplier or REDGUM Brand direct:
T: +61 8 9248 4180 E: orders@for-de.com.au
INTENDED USE
This product has limitations and should be used in accordance to these guidelines. Failure to follow these guidelines may result in damage to the product and injury to the user.
It is the responsibility of the user to ensure the suitability of this product for its intended use. The user should consult their appropriate healthcare professional if unsure of the correct
product usage for their unique circumstances. Only to be used to assistive balancing aid (Do not use the Grab Rail to support your full body weight). Do not use for any other purpose.
Handi Grab Rail must be fitted to a structural wall surface.
ASK FOR THE BRAND
R
FEATURES
- Assistive balancing aid.
- Modern discreet design.
- Ribbed grab rail for improved grip.
- Reinforced Plastic construction.
- Stainless Steel fixings supplied.
SPECIFICATIONS
300mm Handi Grab Bar
Overall: 340mm L x 50mm W x 75mm H
Rail Diameter: Ø30mm
Wall to inside of rail: 45mm
Product Weight: 200g
Max. Supportive Load: 100kg
450mm Handi Grab Bar
Overall: 490mm L x 50mm W x 75mm H
Rail Diameter: Ø30mm
Wall to inside of rail: 45mm
Product Weight: 300g
Max. Supportive Load: 100kg
A: 1 Business Way, Malaga, Western Australia, 6090
REGISTERED DESIGN
INSPECT SUPPLIED PARTS
If you missing any parts, see any damage or
suspect a fault, DO NOT USE THE PRODUCT
and contact your supplier for support.
1 x Rail
HANDI GRAB RAIL
300mm: RG5930 / 450mm: RG5945
USER MANUAL
2 x Cap
2 x Wall Plug
2 x Washer
2 x Screw
1 x Allen Key
Please turn over for more instructions
redgumbrand.com.au
TOOLS
REQUIRED
(Not supplied)
Stud Finder
Pencil
Drill
Drill Bits:
- Ø3mm
- Ø8mm Masonry
- Ø8mm Tile
Drill bit required
depends on wall type.