Related Manuals for REDGUM Brand RG64ABS
Summary of Contents for REDGUM Brand RG64ABS
- Page 1 ADJUSTABLE BLANKET SUPPORT RG64ABS Edition 1 REGISTERED DESIGN USER MANUAL Please read and keep these instructions redgumbrand.com.au ASK FOR THE BRAND...
- Page 2 Any information contained in this user manual shall not be photocopied, reproduced or translated into any other languages without the prior written consent of REDGUM Brand. REDGUM Brand strives to provide the highest quality products possible. Products are subject to change without notice.
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION - INTENDED USE PRODUCT OVERVIEW - FEATURES - SPECIFICATIONS SET UP - UNPACK AND INSPECT SET UP - UNFOLD BLANKET SUPPORT SET UP - UNFOLD BLANKET SUPPORT (continued) SET UP - ADJUST HEIGHT SET UP - ADJUST HEIGHT (continued) USAGE GUIDELINES PRODUCT CARE - INSPECTIONS / CLEANING WARRANTY... -
Page 4: Intended Use
INTRODUCTION Thank you for purchasing this quality REDGUM Brand product. If you have any issues or questions about the adjustable blanket support please contact your supplier or REDGUM Brand direct: T: +61 8 9248 4180 E: orders@for-de.com.au INTENDED USE This product has limitations and should be used in accordance to these guidelines. -
Page 5: Product Overview - Features
Folded (at lowest height setting) 565mm L x 470mm W x 70mm H Product Weight: 2.5kg Maximum Supportive Load: 10kg Please contact REDGUM Brand if you would like any further information on your adjustable blanket support. redgumbrand.com.au ASK FOR THE BRAND... -
Page 6: Set Up: Unpack And Inspect
SET UP: UNPACK AND INSPECT Carefully unpack the adjustable blanket support and visually check the product for any damage prior to use. If you see any damage or suspect a fault, DO NOT USE YOUR PRODUCT and contact your supplier for support. SET UP: UNFOLD BLANKET SUPPORT Please follow these instructions to unfold the adjustable blanket support. -
Page 7: Set Up - Unfold Blanket Support (Continued)
SET UP: UNFOLD BLANKET SUPPORT 3. Rotate the smaller U frame around until it ‘CLICKS’ in position. Smaller U frame Refer to next page about adjusting the blanket support height. redgumbrand.com.au ASK FOR THE BRAND... -
Page 8: Set Up: Adjust Height
SET UP: ADJUST HEIGHT Please follow these instructions to adjust the height of the adjustable blanket support. 1. Position the blanket support on its back as shown. 2. Remove both the press pins from the frame. Press pin 3. Pull out the frame to the required height: - Hole 1: 565mm - Hole 2: 590mm... -
Page 9: Set Up - Adjust Height (Continued)
SET UP: ADJUST HEIGHT 4. Align the holes and refit the press pins to hold the blanket support at the required height. 5. Flip the blanket support onto the preferred end: - Small frame end: 370mm - Large frame end: 470mm Adjustable blanket support is now ready to fit to bed for use. -
Page 10: Product Care
Do not use any abrasive cleaners or abrasive cleaning pads as they could damage the adjustable blanket support. If you have any questions about the cleaning of the product please contact your supplier or REDGUM brand direct. redgumbrand.com.au ASK FOR THE BRAND redgumbrand.com.au... -
Page 11: Warranty
WARRANTY REDGUM Brand adjustable blanket support (RG64ABS) is covered by a 12 month warranty from the date of purchase. If the product has any manufacturing faults during this period contact the place of purchase for assessment. Failures as a result of... - Page 12 DISTRIBUTOR: PROUDLY AUSTRALIAN Owned + Operated redgumbrand.com.au ASK FOR THE BRAND redgumbrand.com.au...
Need help?
Do you have a question about the RG64ABS and is the answer not in the manual?
Questions and answers