Related Manuals for DAPOL 0-4-0 B4 Locomotive
Summary of Contents for DAPOL 0-4-0 B4 Locomotive
- Page 1 Front Cover—Insert 0-4-0 B4 Locomotive O Gauge Model Owner’s Manual Authentic Scale Model...
-
Page 2: Table Of Contents
Contents A history of the Adams B4 ........3 Model specifications / Quick Start ......4 Unboxing ..............5 Operation ..............6 Maintenance ............7 Fitting accessory items / Installing DCC decoder ..8 Speaker installation ..........10 DCC & DCC Sound factory fitted models, including sound function keys .......... -
Page 3: A History Of The Adams B4
Thank you for purchasing this Dapol product. We hope it gives you many years of enjoyment A history of the Adams B4 In 1890 Adams ordered 20 powerful four- coupled tank engines from Nine Elms Works, the design being preferred to six-coupled because of... -
Page 4: Model Specifications / Quick Start
Model Specification • Diecast metal chassis • Diecast wheels, motion and connecting rods • Rocking front axle for perfect running • Sprung buffers • All wheel pick up with brass bearings • Two chimney variants • Removable cab roof with magnets for easy crew installation •... -
Page 5: Unboxing
Unboxing 1) Carefully remove the model whilst attached to its acrylic plinth from the foam insert. 2) Remove the two screws securing the locomotive to the acrylic plinth. Ensure the locomotive is suitably cradled while removing screws to avoid damage. An accessory pack is supplied with your model containing the following items: (See fitting of accessory items for further detail) -
Page 6: Operation
(DC) and DCC layouts. DCC address is factory set to address #3. The sound decoder fitted is a Zimo or a Dapol imperium for DCC fitted versions. If operating a DCC fitted model on DC, please follow the DC operating procedure for your decoder. -
Page 7: Maintenance
Maintenance The model uses components which require little maintenance. We suggest that the drive train and gear box are lubricated after every 100 hours running using a light synthetic lubricating oil such as Dapoil. Warning: Mineral oil types or thicker oils may damage your locomotive paint finish components invalidate... -
Page 8: Fitting Accessory Items / Installing Dcc Decoder
2 functions in order for the firebox flicker to operate. (This is controlled by the AUX 1 output of the decoder). The model is fitted with Dapol’s tool-less DCC and speaker fitting system. To install a decoder and/or optional speakers (2) follow these steps:... - Page 9 Use the ‘hook’ end of the smokebox tool to engage with the hole in the PCB and pull out the PCB. When the PCB is fully removed from the smokebox the decoder blanking plate can be removed in the usual way and replaced with the decoder of your choice...
-
Page 10: Speaker Installation
Speaker Installation If using a sound decoder two 8-ohm ‘Sugar cube’ type speakers should installed. alternative type is fitted, it must produce a total impedance suitable for your decoder’s amplifier. The speaker enclosures are removed by un-clipping (They are each held by 2 clips). Drop the sugarcube speaker into the enclosure with... -
Page 11: Dcc & Dcc Sound Factory Fitted Models, Including Sound Function Keys
DCC Factory Fitted models Factory fitted models are fitted with an imperium DCC decoder (address 3) to control the locomotive. The following function keys on your controller operates special functions. Firebox flicker On/Off DCC Sound Factory Fitted models This model is pre-fitted with a Zimo sound de- coder and sugar cube speakers in the smoke- box. - Page 12 F7 Brake application/release: When first pressed the sound of a brake application will be heard, when pressed again (turned off) the sound of the brakes being released will be heard. F8 Flange squeal on/off This is only heard when the model is in motion.
-
Page 13: Automatic Sounds / Cab Roof Removal
The cab roof is held in position by magnets and can be easily removed if required for ease of crew fitting. Body removal is not required for DCC decoder or speaker installation. Caution: Dapol recommend disassembly, care should be taken to avoid damage to delicate assemblies and detail parts... -
Page 14: 'Realdrive
These two features are added to the ‘light engine’ feature that remains active with or without the ‘RealDrive’ feature. If you are new to ‘RealDrive’ Dapol recommend testing on a clear track, preferably a loop. To activate ‘RealDrive’ set CV4 to 254, and CV309 to 7. - Page 15 Braking intensity is altered via CV349. (factory setting is 27) Sharper brakes (low values in CV349), allow multiple short applications. A gentle brake (higher values in CV349) will allow a single application of the brake to bring the model to a halt.
-
Page 16: Spare Parts
Spare parts A range of spare parts is available for this model on launch. For a full list please and availability refer to the Dapol website but will include Reference Name of part number Cab roof D1705-K02 Chimney Adams Chimney... - Page 17 Reference Name of part number Connecting rod D1705-F04 Cab door handle D1705-K12 Slide in PCB Motor with worm & flywheel 300-E00 Worm gear D1705-M05 Dome per colour D1705-K03 Driving wheel set -black D1705-F01 Driving wheel set -green D1705-F01 Driving wheel set c/w gear D1705-F01 black Driving wheel set c/w gear...
-
Page 18: Manufacturer Warranty
If a replacement model is not available you may find a refund disappointing, or you may simply prefer to deal directly with Dapol. For these reasons, we offer a 12-month manufactur- er’s repair warranty on this product in addition to your statutory rights. - Page 19 VERY IMPORTANT: Please ensure that your dealer has supplied a proper printed receipt with your purchase. Without this, our service agents are unable to offer warranty service. Repairs will be charged at the prevailing rate. Your statutory rights with the place of purchase are unaffected. How to claim Locate the proof of purchase (copies acceptable) Year 2 claims: Return with validated 2nd year...
- Page 20 Requests for outright refund or replacement should be directed to the place of purchase. 3) In the event the model cannot be repaired, at Dapol’s sole option, you may be offered: a replacement model (subject...
- Page 21 9) Dapol and its agents shall be the sole arbiters as to the warranty status of the model and their decision is final. 10)Whilst every effort will be made to protect such, Dapol and its agents shall not be liable for damage or alteration to any ‘super...
-
Page 22: Contact Information
13)All repairs will be repaired on a first in-first out basis, within a reasonable period after receipt by our agent. Unless agreed in writing by Dapol or its agent prior to receipt of the model time shall not be of the essence in any contract. -
Page 23: Notes
NOTES: This page is left blank to write your own notes... - Page 24 Back Cover—Insert Dapol Limited Unit 7 Gledrid Industrial Park, chirk, Wrexham, LL14 5DG Telephone: 01691 774455 Website: www.dapol.co.uk Email: sales@dapol.co.uk Spares: dapolspares.dccsuplies.com...
Need help?
Do you have a question about the 0-4-0 B4 Locomotive and is the answer not in the manual?
Questions and answers