Using Computer Setup (F10) Utilities - Compaq d338 - Microtower Desktop PC Manual

Using Computer Setup (F10) Utilities

✎
Ä
Computer Setup (F10) Utility Guide
Computer Setup can be accessed only by turning the computer on or
restarting the system. To access the Computer Setup Utilities menu,
complete the following steps:
1. Turn on or restart the computer. In Microsoft Windows, click
Start > Shut Down > Restart the Computer.
F10
2. Press the key as soon as the monitor light turns green.
If you do not press the
the computer off, then on again, and press the
access the utility.
3. Select your language from the list and press the
4. A choice of four headings appears in the Computer Setup Utilities
menu: File, Storage, Security, and Advanced.
5. Use the arrow (left and right) keys to select the appropriate
heading. Use the arrow (up and down) keys to select the option
you want, then press the
Setup Utilities menu, press the
6. To apply and save changes, select File > Save Changes
and Exit.
❏
If you have made changes that you do not want applied,
select Ignore Changes and Exit.
❏
To reset to factory settings, select Set Defaults and Exit.
This option will restore the original factory system defaults.
CAUTION: Do NOT turn the computer power OFF while the ROM is
saving the F10 Computer Setup changes because the CMOS could
become corrupted. It is only safe to turn off the computer after exiting the
F10 Setup screen.
www.hp.com
F10
key at the appropriate time, you must turn
Enter
key. To return to the Computer
Esc
key.
Computer Setup (F10) Utility
F10
key again to
Enter
key.
3