Compaq d338 - Microtower Desktop PC Manual page 6

Computer Setup (F10) Utility
2
■
Enter the Asset Tag or property identification number assigned
by the company to this computer.
■
Enable the power-on password prompt during system restarts
(warm boots) as well as during power-on.
■
Establish a setup password that controls access to Computer
Setup (F10) Utility and the settings described in this section.
■
To secure integrated I/O functionality, including the serial, USB,
or parallel ports, audio, or embedded NIC, so that they cannot be
used until they are unsecured.
■
Enable or disable Master Boot Record (MBR) Security.
■
Enable or disable removable media boot ability.
■
Enable or disable removable media write ability (when supported
by hardware).
■
Solve system configuration errors detected but not automatically
fixed during the Power-On Self-Test (POST).
■
Replicate the system setup by saving system configuration
information on diskette and restoring it on one or more
computers.
■
Execute self-tests on a specified IDE hard drive (when supported
by drive).
■
Enable or disable DriveLock security (when supported by
MultiBay drive).
www.hp.com Computer Setup (F10) Utility Guide