Access Panel
1.
Prepare the computer for disassembly
2.
Remove the side cover by loosening the screw that connects the cover to the computer.
Figure 2-1
3.
Grasp the handle on the side cover and pull towards the back of the computer. Slide the cover
about 2.4 cm (1 inch) to remove it.
NOTE:
with the access panel is facing up.
Figure 2-2
4
Chapter 2 Removal and Replacement Procedures Microtower (MT) Chassis
Removing the Computer Access Panel
You may want to lay the computer on its side to install internal parts. Be sure the side
Removing the Computer Access Panel
(Preparation for Disassembly on page
3).