Starkey StarLink Edge Remote Microphone Quick Tips

QUICKTIP
StarLink Edge
Remote Microphone
Pairing
The Remote Mic must be paired to interact with compatible 2.4 GHz hearing aids with the G2 Neuro Processor. Pairing occurs
once, then the hearing aids and Remote Mic will automatically recognize each other. The Remote Mic can be paired
within the fitting software or outside of the fitting software.
Pairing within Pro Fit
Launch Pro Fit and connect hearing aids.
1
Select Accessories from the Preparation Session
2
in Pro Fit or from the Flyout Menu
Select How to Pair Accessories for pairing instructions if needed.
3
Ensure the Remote Mic is powered on.
4
Place the hearing aids within six inches of the Remote Mic.
5
Press and hold the pairing button for 2 seconds. The LED will blink green.
6
Select to put the hearing aids into pairing mode.
7
Pairing is successful when the Remote Mic image
8
displays on the accessory screen.
Use the dropdown menu below the Remote Mic
9
to set "Hearing Aid Mic While Streaming."
Use the dropdown menu below the Remote Mic to
10
optimize streaming sound. Options are Equalized (default),
Treble Boost, Bass Boost, and Overall Boost.
Microphone
Power Supply
Jack (USB-C)
Pairing Button
.
Power On
Slide the switch toward the LED. The LED
will illuminate white for 2 seconds.
Power Off
Slide the switch away from the LED.
The LED will illuminate red for 2 seconds.
Orange will be seen next to the switch.
8
7
9
Neuro Processor
Indicator Light
Power Switch
Volume Control
& Program Button
10