Starkey StarLink Edge Quick Start Manual

QUICKTIP
StarLink Edge
Table Microphone
Pairing
The 2.4 GHz Table Microphone must be paired to interact with compatible 2.4 GHz hearing aids with the
G2 Neuro Processor. Pairing occurs once, then the hearing aids and Table Microphone will automatically recognize
each other. The Table Microphone can be paired within the fitting software or outside of the fitting software.
Pairing within Pro Fit
1 Launch Pro Fit and connect hearing aids.
2
Select Accessories from the Preparation Session in Pro Fit or from the Flyout Menu
Select How to Pair Accessories for pairing instructions if needed.
3
Ensure the Table Microphone is powered on by holding the power
4
button for 2–3 seconds until the brackets light up green.
Place the hearing aids within 6 inches of the Table Microphone.
5
6
Place the Table Microphone in pairing mode by pressing the
Hearing Aid Pairing Button on the bottom of the device for
2 seconds. The blinking blue brackets on the top of the
device indicate the Table Microphone is in pairing mode.
7
Select to put the hearing aids in pairing mode.
8
Pairing is successful when the Table Microphone
displays on the Accessories screen.
9 Use the dropdown menu below the Table Microphone
to set Hearing Aid Mic while Streaming.
10
Use the dropdown menu below the Table Mic to optimize
streaming sound. Options are Equalized (default),
Treble Boost, Bass Boost, and Overall Boost.
Power
Button
Microphones
Magnetic Interface
For Hanger
8
9
Neuro Processor
Volume Buttons
Directional
Touch Keys
Automatic
Mode Button
Hearing Aid
Pairing Button
USB-C Jack
.
7
10