Icom IC-92AD Service Manual page 34

RECEIVE ADJUSTMENT (continued)
1) Select an adjustment item using [2] / [8] keys.
2) Set the SSG as specifi ed (frequency, deviation and output level).
3) Push the [BAND] key to adjust (automatic) and store the adjustment value.
ADJUSTMENT
B BAND 0 • Supply voltage : 7.4 V
S-METER
[PREPARATION]
(VHF) 1 • Displayed freq. : "(6)"
[145.1 MHz (S0 level)]
[145.1 MHz (S3 level)]
[145.1 MHz (Full scale)]
(UHF) 2 • Displayed freq. : "(7)"
[435.1 MHz (S0 level)]
[435.1 MHz (S3 level)]
[435.1 MHz (Full scale)]
A BAND 0 • Supply voltage : 7.4 V
SQUELCH
[PREPARATION]
[1.01 MHz] 1 • Displayed freq. : "
[15.1 MHz] 2 • Displayed freq. : "
[40.1 MHz] 3 • Displayed freq. : "
[60.1 MHz] 4 • Displayed freq. : "
[87.5 MHz] 5 • Displayed freq. : "
[145.1 MHz] 6 • Displayed freq. : "(6)"
[220.1 MHz] 7 • Displayed freq. : "
[305.2 MHz] 8 • Displayed freq. : "
[435.1 MHz] 9 • Displayed freq. : "(7)"
[535.1 MHz] 10 • Displayed freq. : "
[800.1 MHz] 11 • Displayed freq. : "
[USA]
[SEA], [CHN], [EXP], [CAN]
ADJUSTMENT CONDITION
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
• Receiving
(1) (2) (3)
OPERATION
• C o n n e c t a n S S G t o t h e
antenna connector and set as;
Frequency : "(6)"
Modulation : 1 kHz
Deviation : 3.5 kHz.
• Set the SSG as;
Level : –8 dBµ
• Set the SSG as;
Level : –6 dBµ
• Set the SSG as;
Level : 0 dBµ
• Set the SSG as;
Level : –8 dBµ
• Set the SSG as;
Level : –6 dBµ
• Set the SSG as;
Level : 0 dBµ
• C o n n e c t a n S S G t o t h e
antenna connector and set as;
Level : "OFF"
"
–
"
–
"
–
"
–
"
–
–
"
–
"
–
–
"
–
"
–
(4) (5)
5 - 18
ADJUSTMENT
ITEM
[ ]
[ ]
(6) (7)
VALUE
Push the
[BAND] key.
(Automatic
adjustment)
Push the
[BAND] key.
(Automatic
adjustment)