Download Print this page

Virutex FP192N Operating Instructions Manual page 9

Hinge router

Advertisement

Available languages

Available languages

11. NOISE LEVEL AND VIBRATIONS
The noise and vibration levels of this device have
been measured in accordance with European stan-
dard EN60745-2-17 and EN 60745-1 and serve as a
basis for comparison with other machines with similar
applications.
The indicated vibration level has been determined for
the device's main applications and may be used as an
initial value for evaluating the risk presented by expo-
sure to vibrations. However, vibrations may reach levels
that are quite different from the declared value under
other application conditions, with other tools or with
insufficient maintenance of the electrical device or its
accessories, reaching a much higher value as a result
of the work cycle or the manner in which the electrical
device is used.
Therefore, it is necessary to establish safety measures
to protect the user from the effects of vibrations, such
as maintaining both the device and its tools in perfect
condition and organising the duration of work cycles
(such as operating times when the machine is subjected
to loads, and operating times when working with no-load,
in effect, not in use, as reducing the latter may have a
considerable effect upon the overall exposure value).
12. WARRANTY
All VIRUTEX power tools are guaranteed for 12 months
from the date of purchase, excluding any damage which
is a result of incorrect use or of natural wear and tear
on the machine. All repairs should be carried out by the
official VIRUTEX technical assistance service.
13. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic was-
te. Recycle equipment, accessories and packaging in ways
that minimise any adverse effect on the environment.
Comply with the current regulations in your country.
Applicable in the European Union and in European
countries with selective waste collection systems:
If this symbol appears on the product or in the accom-
panying information, at the end of the product's useful
life it must not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products
without prior notice.
F R A N Ç A I S
PAUMELLEUSE FP192N
Important
Avant d'utiliser la machine, lisez attenti-
vement ce MANUEL D'INSTRUCTIONS et la
BROCHURE D'INSTRUCTIONS GÉNÉRALES
DE SÉCURITÉ qui vous sont fournis avec
cette machine. Assurez-vous de bien
avoir tout compris avant de commencer
à travailler sur la machine.
Gardez toujours ces deux manuels
d'instructions à portée de la main pour
pouvoir les consulter, en cas de besoin.
1. INSTRUCTIONS DE SÉCURITÉ POUR
LE MANIEMENT DE L'AFFLEUREUSE
Veuillez lire attentivement la BROCHU-
RE D'INSTRUCTIONS GÉNÉRALES DE
SÉCURITÉ qui est jointe à la documen-
tation de la machine.
1. Avant de brancher la machine, vérifier si la tension
d'alimentation correspond à celle indiquée sur la pla-
que des caractéristiques.
2. Toujours maintenir les mains éloignées de la zone de
coupe. Toujours fixer fermement la machine.
3. Ne jamais utiliser d'outils défectueux ou en mauvais
état.
4. Toujours utiliser des fraises au diamètre de tige co-
rrect pour la pince à utiliser et adaptées à la vitesse
de l'outil.
Débrancher la machine du secteur avant
de réaliser toute opération d'entretien.
2. CARACTÉRISTIQUES
Puissance.................................................750 W
Tours...................................14000-30000./min
Ø pince porte-fraise standard.......................8 mm
Poids.......................................................1,8 Kg
Niveau de pression acoustique continu
équivalent pondéré A...........................................89 dBA
Niveau de puissance acoustique A...................100 dBA
-1
9

Advertisement

loading
Need help?

Need help?

Do you have a question about the FP192N and is the answer not in the manual?