Advertisement
Quick Links
Product Name:
SKU #:
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the
highest standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Please make sure to unpack all the components from the packaging inside the carton to ensure that
there are no missing or damaged parts. Do not attempt to assemble or use the product if any parts are
missing or damaged.
CARTON CONTENTS:
Description
Fountain
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR250/LED
AP333/LED
YH300-70/LED
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Select a flat, level surface for your fountain's assembly and final location.
2. Insert the water supply tube into the pump outlet from the opening at the back of the fountain. Insert the
LED connector into the pump connector and twist it to tighten. Place the pump inside the back of the
fountain and draw the pump power cord out of the fountain back.
3. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
4. Connect the power cable to the outlet. If installed properly, the water flow in the fountain will begin shortly.
5. Please do not use the electrical plug in wet weather conditions. Please note: There may be air in the pump
on first use. It may take several minutes until all the air escapes.
6. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed where it
cannot be damaged.
7. Do not leave your fountain running for extended periods when no one is present to observe the
performance.
8. Check the area around your fountain regularly to ensure no leakage.
9. Please refresh the fountain with water each week to ensure it is in good condition.
10. Do not add harmful chemicals to the water, as it may alter the finish.
Outdoor Polyresin Fountain with Lights
WHF2353
Quantity
1
1
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.
Advertisement
Related Manuals for LuxenHome WHF2353
Summary of Contents for LuxenHome WHF2353
- Page 1 Product Name: Outdoor Polyresin Fountain with Lights SKU #: WHF2353 Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
- Page 2 Instruction Manual SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for power units. Product Name: Outdoor Polyresin Fountain with Lights SKU #: WHF2353 Note: The above diagram is for illustrative purposes only.
- Page 3 Product Name: Outdoor Polyresin Fountain with Lights SKU #: WHF2353 MAINTENANCE OF YOUR PUMP: Keep the water clean – clean water will prolong the life of your pump. • Use a pre-filter on your pump if available.
- Page 4 Product Name: Outdoor Polyresin Fountain with Lights SKU #: WHF2353 Before connecting to the power source, ensure the pump is assembled and completely submerged • in water. Check the water level regularly to ensure the pump is completely submerged during operation. The •...
Need help?
Do you have a question about the WHF2353 and is the answer not in the manual?
Questions and answers