Installing An Optional Cd-Rom Drive; Tools Needed - Compaq 219700-001 - ProLiant - 1500 Installation And User Manual

2-1

Installing an Optional CD-ROM Drive

Chapter 2
Installing an
Optional CD-ROM Drive
This chapter outlines general instructions for installing an optional Compaq
IDE CD-ROM Drive in a generic Compaq system. For more information on
installation in your particular system, see the documentation that was shipped
with your unit.
Since several vendors are used to source Compaq IDE CD-ROM drives, the
drive you receive may appear slightly different from the drives portrayed in
this guide. All drives are, however, identical in capability and operation, and
each vendor's drive has been thoroughly tested for use in Compaq systems.

Tools Needed

To install this drive in a system, you will need the following tools:
Torx T-15 screwdriver
Torx T-10 screwdriver
IDE CD-ROM Drive for Servers and Workstations Installation and User Guide