Configuring Microsoft Windows Server 2003 Cluster Service (Mscs) - Dell PowerEdge Cluster SE500W Installation And Troubleshooting Manual

4 Follow the directions in the Cluster Configuration Wizard window.
5 Add the remaining node to the cluster:
From node 2, click the Start button and select Run.
a
In the Run box, type C:\windows\cluster\cluscfg.exe.
b
Click OK.
c
When prompted, select The second or next node in the cluster.
d
You are joining an existing cluster.

Configuring Microsoft Windows Server 2003 Cluster Service (MSCS)

The cluster setup files are automatically installed on the system disk. To create a new cluster:
1 From either node, click the Start button, select Programs→ Administrative Tools, and then
double-click Cluster Administrator.
2 From the File menu, select Open Connection.
3 In the Action box of the Open Connection to Cluster, select Create new cluster.
The New Server Cluster Wizard appears.
4 Click Next to continue.
5 Follow the procedures in the wizard, and then click Finish.
6 Add the second node to the cluster.
Turn on the remaining node.
a
Click the Start button, select Programs→ Administrative Tools, and double-click
b
Cluster Administrator.
From the File menu, select Open Connection.
c
In the Action box of the Open Connection to Cluster, select Add nodes to cluster.
d
In the Cluster or server name box, type the name of the cluster or click Browse to select
e
an available cluster from the list, and then click OK.
The Add Nodes Wizard window appears.
• If the Add Nodes Wizard does not generate a cluster feasibility error, go to step f.
• If the Add Nodes Wizard generates a cluster feasibility error, go to "Adding Cluster
Nodes Using the Advanced Configuration Option."
Click Next to continue.
f
Follow the procedures in the wizard, and then click Finish.
g
Preparing Your Systems for Clustering
51