Related Manuals for Dell POWEREDGE CLUSTER SE100
Summary of Contents for Dell POWEREDGE CLUSTER SE100
- Page 1 Dell™ PowerEdge™ Cluster SE100, SE200, and SL200 PLATFORM GUIDE ™ www.dell.com support.dell.com...
- Page 2 Information in this document is subject to change without notice. © 1999–2000 Dell Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Computer Cor- poration is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, PowerEdge, PowerVault, and Dell OpenManage are trademarks of Dell Computer Corporation;...
-
Page 3: Table Of Contents
PowerEdge Cluster SE100, SE200, and SL200 Configuration Matrixes ..10 PowerEdge Cluster SE100 Configuration Matrix ......12... - Page 5 SE200, and SL200 Platform Guide This guide provides the latest information on using Microsoft 4.0, Enterprise Edition operating system and Windows ating system for the following Dell PowerEdge Cluster products and components: • Dell PowerEdge Cluster SE100 — Servers: PowerEdge 2300, 4300, 4350, 6300, and 6350 —...
-
Page 6: Poweredge Cluster Se100
Windows 2000 Advanced Server Installation instructions for hardware configurations using Windows 2000 Advanced Server can be found in the Dell PowerEdge Cluster SE100, SE200, and SL200 Installa- tion and Troubleshooting Guide. Your PowerEdge Cluster SE100 system supports the following PowerEdge servers as... -
Page 7: Windows Nt 4.0 Service Pack Support
Windows NT 4.0 Service Pack Support Windows NT SP 6.0a or later is recommended for PowerEdge Cluster SE100 systems. NOTE: Both nodes must be configured with similar drivers (network interface control- lers [NIC], redundant array of independent disks [RAID] controller, and so on), utilities (Dell OpenManage™... -
Page 8: Adding Peripherals Required For Poweredge 6300 Or 6350
Windows 2000 Advanced Server Installation instructions for hardware configurations using Windows 2000 Advanced Server can be found in the Dell PowerEdge Cluster SE100, SE200, and SL200 Installa- tion and Troubleshooting Guide. Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide... -
Page 9: Windows Nt Server 4.0, Enterprise Edition
• PowerEdge 4400 - 4300 • PowerEdge 6400 - 6300 • PowerEdge 6400 - 4400 • PowerEdge 6450 - 6350 • PowerEdge 8450 - 6350 • PowerEdge 8450 - 6450 support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide... -
Page 10: Windows Nt 4.0 Service Pack Support
— RAID controllers can be installed in any available PCI slot. — If you use multiple RAID controllers and there are slots available, Dell recom- — If you are not currently using a DRAC 2 and do not plan to use one in the... -
Page 11: Adding Peripherals Required For Poweredge 2450 Cluster Nodes
— RAID controllers can be installed in any available PCI slot. • NICs — NICs can be installed in any available PCI slot. Dell recommends that Giganet • DRAC 2 — If you are currently using a DRAC 2 or plan to use one in the future, install it NOTES: If you plan to use a DRAC 2, one PCI slot is available for a PERC 2/DC RAID controller for shared storage. -
Page 12: Adding Peripherals Required For Poweredge 4400 Cluster Nodes
— RAID controllers can be installed in any available 64-bit, 33-MHz or 32-bit, — If you use multiple RAID controllers and there are available slots, Dell recom- NOTICE: The PERC 2/DC is keyed to prevent installation in a 64-bit 33/ 66 MHz PCI slot. -
Page 13: Adding Peripherals Required For Poweredge 8450 Cluster Nodes
— RAID controllers can be installed in any available 32-bit, 33-MHz or 64-bit, — If you use multiple RAID controllers and there are available PCI slots, Dell NOTICE: The PERC 2/DC is keyed to prevent installation in a 64-bit 33/ 66 MHz PCI slot. -
Page 14: Poweredge Cluster Se100, Se200, And Sl200 Configuration Matrixes
— Install the RAID controller for the server’s internal drives in PCI slot 1. — Install additional RAID controllers in any available 64-bit, 33-MHz or 32-bit, — If you use multiple RAID controllers and there are available slots, Dell recom- NOTICE: The PERC 2/DC is keyed to prevent installation in a 64-bit 33/ 66 MHz PCI slot. - Page 15 PowerEdge Cluster Configuration Matrix for spe- cific instructions • Each cluster node’s PCI slot number, a description of each slot, the adapters installed in each slot, and a usage description for each adapter installed support.dell.com Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide...
-
Page 16: Poweredge Cluster Se100 Configuration Matrix
PCI slot 3 PCI slot 4 PCI slot 5 PCI slot 6 PCI slot 7 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide PowerEdge Cluster SE100 PowerEdge Server Model Description (Drive letters, RAID types, applications/data installed) Node 1 Node 2... -
Page 17: Configuration Matrix
Storage 1 Storage 2 Storage 3 Storage 4 Storage 1 Storage 2 Adapter Installed (PERC 2/SC, PERC 2/DC, NIC, and so on) Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide Windows NT Name Storage 3 Storage 4 Usage (Public Network, Private Network,... - Page 18 Dell PowerEdge Cluster SE100, SE200, and SL200 Platform Guide...