Subscribe to Our Youtube Channel
Related Manuals for Zodiac VORTRAX TRX 7700 iQ
Summary of Contents for Zodiac VORTRAX TRX 7700 iQ
- Page 1 VORTRAX Installation and user manual - English Professional electric cleaner Translation of the original instructions in French More documents on: www.zodiac.com H0743700.A - 2021/12- EC1102B...
-
Page 2: General Warnings
WARNINGS • Before handling the appliance, it is vital that you read this installation and user manual, as well as the "Warranties" booklet delivered with the appliance. Failure to do so may result in material damage or serious or fatal injury and will void the warranty. - Page 3 WARNINGS ASSOCIATED WITH ELECTRICAL APPLIANCES • The power supply to the appliance must be protected by a dedicated 30 mA Residual Current Device (RCD), complying with the standards and regulations in force in the country in which it is installed. •...
-
Page 4: Table Of Contents
CONTENTS ❶ Information before use 1.1 I Package contents 1.2 I Technical specifications and marking 1.3 I Operating principle 1.4 I Pool preparation ❷ Use 2.1 I Immersing the cleaner in the pool 2.2 I Electricity supply connection 2.3 I Control box functions 2.4 I Starting a cleaning cycle 2.5 I Meaning of the sensor LED 2.6 I Removing the cleaner from the water... -
Page 5: ❶ Information Before Use
❶ Information before use 1.1 I Package contents 7 500 iQ 7 700 iQ Cleaner + floating cable Control box Caddy kit Dual filtration : Very fine debris single filter (60µ) + Fine debris single filter (150µ) Simple filtration : Very fine debris single filter (stainless steel) or Fine debris single filter (60µ) Protective cover... -
Page 6: I Technical Specifications And Marking
1.2 I Technical specifications and marking 1.2.1 Technical specifications 7 500 iQ 7 700 iQ 220 - 240 VAC, 50/60Hz, Class II* Control box power supply Cleaner power supply voltage 30 V DC Maximum power input 150 W Cable length 30 m 25 m Cleaner weight**... -
Page 7: I Operating Principle
1.3 I Operating principle The cleaner is separate from the filtration system and can function independently. It just simply needs to be connected to the mains power supply. It finds the best route to move around and clean the areas of the pool for which it has been designed (bottom, walls, water line). -
Page 8: ❷ Use
❷ Use 2.1 I Immersing the cleaner in the pool • Before the first use, remove the wedge between the robot cover and the filter holder. • When using the cleaner for the first time or when it comes out of winter storage, use the fine debris filter (150 µm) only on 7 500 iQ models and the stainless steel filter on 7 700 iQ models. -
Page 9: I Electricity Supply Connection
2.2 I Electricity supply connection In order to avoid any risk of electrocution, fire or serious injury, please follow the instructions below: • Use of an electrical extension is prohibited when connecting the control box. • Make sure that the socket can be easily accessed at all times and is protected from rain or splashes. -
Page 10: I Control Box Functions
2.3 I Control box functions 7 500 iQ Symbol Description 7 700 iQ Starting/Stopping the appliance Start delayed Set up the iAquaLink™ connection Bluetooth™ connection status Wi-Fi connection status "Lift System" remove from pool mode Choose a cleaning mode Bottom only mode Smart Mode (optimised cleaning of the bottom, walls, and water line) Intensive Bottom, Walls and Water line Mode Water line only mode... -
Page 11: I Starting A Cleaning Cycle
2.4 I Starting a cleaning cycle In order to avoid any risk of injury or material damage, please follow the instructions below: • Bathing is prohibited when the appliance is in the pool. • Do not use the appliance during a shock chlorination. Wait until the chlorine level has reached the recommended value before immersing the cleaner. -
Page 12: I Meaning Of The Sensor Led
2.5 I Meaning of the sensor LED LED status Blue Green Orange "Lift System" or Steady Cleaning cycle activated "Spot Clean" function Filter full activated No current cycle or error Cycle in progress, pool Remote control function Flashing analysis, or finishing activated phases 2.6 I Removing the cleaner from the water... - Page 13 2.6.2 Manually • Switch off the appliance by pressing • Bring the cleaner to the edge of the pool by gently pulling on the floating cable. • When possible, pick up the cleaner by the handle and lift it gently out of the pool so that the water it contains drains into the pool.
-
Page 14: I Good Practices After Each Cleaning Operation
2.7 I Good practices after each cleaning operation 2.7.1 Clean the filter as soon as the appliance is out of the pool • The cleaner's performance may be reduced if the filter is full or dirty. • Clean the filter in clean water as soon as the appliance is removed form the pool after each cleaning cycle. -
Page 15: ❸ Using The Iaqualink™ App
❸ Using the iAquaLink™ app 3.1 I Operating principle Cleaner Mobile device Home Wi-Fi control box (smartphone or tablet) Cleaner network The iAquaLink™ app is available for iOS and Android systems. With the iAquaLink™ app, you can control the cleaner from any location at any time and have the benefit of advanced functions such as additional programming and troubleshooting assistance. - Page 16 Home Wi-Fi network • The LED flashes during the pairing process. • A message is displayed on the • Press the button on the screen confirm that • Select the home Wi-Fi network. ™ control box to enable Bluetooth ™ Bluetooth connection has been and start the pairing process.
-
Page 17: I Functions Available In The App
3.3 I Functions available in the app RA 67 - - iQ RA 63 - - iQ Symbol Description RA 65 - - iQ RA 68 - - iQ Alpha 63 iQ Bio RA 69 - - iQ Starting/Stopping the appliance "Lift System"... -
Page 18: I Control Using The App
3.4 I Control using the app Before controlling the cleaner with the app, you must: • Connect the control box to a power outlet, • Immerse the cleaner in the pool. 3.4.1 Programming and controlling cleaning cycles From the application: •... -
Page 19: ❹ Maintenance
3.4.4 Error messages • If an error is detected, a warning symbol will be displayed Press the warning symbol to display the troubleshooting solutions, see § "5.2 I User alerts". Select Clear Error if you think you have solved the problem, or select OK if you want to leave the cleaner in error mode and troubleshoot the problem later. -
Page 20: I Clean The Filter As Soon As The Appliance Is Out Of The Pool
4.2 I Clean the filter as soon as the appliance is out of the pool • The cleaner's performance may be reduced if the filter is full or dirty. • Clean the filter(s) with clean water after each cleaning cycle. For 7 700 iQ models, also use the scouring side of a sponge to clean the stainless steel filter after each cleaning cycle. -
Page 21: I Cleaning The Brushes And The Centre Bridge
4.3 I Cleaning the brushes and the centre bridge • The performance of the appliance may diminish if the brushes are too dirty or if debris or objects become trapped in the centre bridge (between the two brushes). • Clean the brushes and the centre bridge in clean water as soon as the appliance is removed from the pool after each cleaning cycle. -
Page 22: I Cleaning The Propeller
4.5 I Cleaning the propeller To avoid serious injury: • Disconnect the cleaner from the power supply. • Wear gloves when maintaining the propeller • Loosen the screw on the grid (see figure • Remove the grid (see figure • Remove the flow guide carefully (see figure •... -
Page 23: I Replacing The Brushes
4.6 I Replacing the brushes Are the brushes worn? • Replace the brushes if the wear indicators are similar to example Remove the worn brushes • Remove the tabs from the holes inside which they are fastened, then remove the brushes. Position the new brushes. -
Page 24: I Replacing The Tracks
4.7 I Replacing the tracks • Pull on the inside of the old track to remove the track lip from the front wheel (see image • Remove the old track from the front wheel, then remove track from the rear wheel (see image •... -
Page 25: ❺ Troubleshooting
❺ Troubleshooting • If a problem occurs, before you contact your retailer, please carry out these few simple checks using the following tables. • If the problem is not resolved, contact your retailer. • : Actions to be performed by a qualified technician only. 5.1 I Appliance behaviour •... -
Page 26: I User Alerts
There is a difference between the temperature • When the cleaner is at the bottom of the pool, it is normal for there to be a displayed in the iAquaLink™ temperature difference between that measured by the cleaner and that measured by app and the temperature a thermometer placed at the pool's surface or measured by another appliance. -
Page 27: I Troubleshooting The Connection To The Iaqualink™ App
Display on control box Display in the Solutions iAquaLink™ app Flashing LED Error code (depending on the (depending on model) the model) • Disconnect the control box for at least 15 seconds. • Close the iAquaLink™ app. • Connect the control box to the cleaner. •... - Page 28 • Cover the appliance to protect it from the sun's rays and • Very high luminosity. check that the light indicators turn on. • Control box • Connect the control box (see § "2.2 I Electricity supply disconnected. connection"). • All LEDs are off. •...
-
Page 29: I Updating Connected Cleaners
5.4 I Updating connected cleaners Connected cleaners can be updated with new developed functions or product improvements. Users cannot always see these improvements. The cleaner cannot be controlled by the app until the update has been installed. When an update is available (visible in the iAquaLink™ app, see image ) here are some recommendations before you press the start installation button: •... - Page 30 For more information, product registration and customer support: www.zodiac.com ©2022 Zodiac Pool Systems LLC. All rights reserved. ZODIAC® is a registered trademark of Zodiac International, S.A.S.U., used under license. All other trademarks are the property of their respec- tive owners.
Need help?
Do you have a question about the VORTRAX TRX 7700 iQ and is the answer not in the manual?
Questions and answers