Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Worx WX526L Series
Summary of Contents for Worx WX526L Series
- Page 1 20V 6-1/2’’ Cordless Circular Saw WX526L WX526L.X...
- Page 3 100%...
-
Page 6: Table Of Contents
TABLE OF CONTENT dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of 1. PRODUCT SAFETY flammable liquids, gases or dust. Power tools 2. COMPONENT LIST create sparks which may ignite the dust or fumes. -
Page 7: Safety Instructions For All Saws
result in personal injury. handling and control of the tool in unexpected e) Do not overreach. Keep proper footing and situations. balance at all times. This enables better control of the power tool in unexpected situations. 5. BATTERY TOOL USE AND CARE Dress properly. -
Page 8: Further Safety Instructions For All Saws
the workpiece. but kickback forces can be controlled by the c) Adjust the cutting depth to the thickness operator, if proper precautions are taken. of the workpiece. Less than a full tooth of b) When blade is binding, or when interrupting the blade teeth should be visible below the a cut for any reason, release the trigger and workpiece. -
Page 9: Safety Warnings For Battery Pack
retracting handle and as soon as blade enters i) Keep battery pack clean and dry. the material, the lower guard must be released. j) Wipe the battery pack terminals with a clean For all other sawing, the lower guard should dry cloth if they become dirty. -
Page 10: Component List
OUTER FLANGE Do not burn SAW BLADE INNER FLANGE FRONT HANDLE Li-Ion battery, battery must be recycled. LOCK-OFF BUTTON Li-I on ON/OFF SWITCH Make sure the battery is removed HANDGRIP prior to changing accessories or making any adjustments to the DUST ADAPTOR * tool. -
Page 11: Intended Use
Machine weight(bare ASSEMBLY 5.5 lbs (2.5 kg) tool) Saw blade assembly and removing **X may be followed by one or two characters. All NOTE: The spindle lock button must models are the same except model number and be pressed to loosen or tighten the trademark.The suffix in models may be number blade bolt. -
Page 12: Maintain Tools With Care
7.MAINTAIN TOOLS WITH CARE Remove the battery before carrying out any adjustment, servicing or maintenance. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized service facility. Your power tool requires no additional lubrication or maintenance.
Need help?
Do you have a question about the WX526L Series and is the answer not in the manual?
Questions and answers