Removal & Replacement Procedures - Compaq 133756-004 - Deskpro EN - 6550 Model 6400 Maintenance & Service Manual

4
chapter
R & R
EMOVAL
This chapter provides subassembly/module level removal and replacement procedures for
the Small Form Factor.
After completing all necessary removal and replacement procedures, run Diagnostics
utility to verify that all components operate properly.
CAUTION: When the computer is plugged into an AC power source, there is always voltage
applied to the system board. You must disconnect the power cord from the power source before
opening the computer to prevent system board or component damage.
EPLACEMENT
P
ROCEDURES
Compaq Deskpro EN Series of Personal Computers 4-1