Connectors - Asus V6-P5G41E User Manual

3.4

Connectors

1.. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P5G41T-M LX2/GB
P5G41T-M LX2/GB SATA connectors
Install the Windows
2. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 480 Mbps connection speed.
P5G41T-M LX2/GB
P5G41T-M LX2/GB USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
The USB module is purchased separately.
ASUS V-series P5G41E
SATA4
SATA3
SATA2
SATA1
XP Service Pack 2 or later version before using Serial ATA.
®
USB56 USB78
PIN 1 PIN 1
3-5