Primary Ide Master/Slave, Sata1~6 - Asus V6-M4A3000E User Manual

4.3.3. Primary.IDE.Master/Slave,.SATA1~6
While entering Setup, the BIOS automatically detects the presence of IDE/SATA
devices. There is a separate sub-menu for each IDE/SATA device. Select a device
item then press <Enter> to display the IDE/SATA device information.
Main
Primary IDE Master
Device : Not Detected
Type
LBA/Large Mode
Block(Multi-Sector Transfer) M
PIO Mode
DMA Mode
SMART Monitoring
32Bit Data Transfer
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
The BIOS automatically detects the values opposite the dimmed items (Device,
Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and
SMART monitoring). These values are not user-configurable. These items show
Not Detected if no IDE/SATA device is installed in the system.
Type.[Auto]
Selects the type of IDE/SATA drive. Setting to Auto allows automatic selection
of the appropriate IDE/SATA device type. Select CDROM if you are specifically
configuring a CD-ROM drive. Select ARMD (ATAPI Removable Media Device)
if your device is either a ZIP, LS-120, or MO drive. Configuration options: [Not
Installed] [Auto] [CDROM] [ARMD]
This item appears only when you select the Primary.IDE.Master/Slave and
SATA5/6 devices.
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA
mode disabled. Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) M [Auto]
Enables or disables data multi-sectors transfers. When set to Auto, the data
transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
ASUS V-series M4A3000E
BIOS SETUP UTILITY
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
Select the type of
Select the type
device connected
of device connected
to the system.
to the system
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
4-11