Asus Crashfree Bios 3 Utility - Asus V6-M4A3000E User Manual

4.1.3. ASUS.CrashFree.BIOS.3.utility
The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore
the BIOS file when it fails or gets corrupted during the updating process. You can
update a corrupted BIOS file using the motherboard support DVD or a removable
device that contains the updated BIOS file.
•
•
•
Recovering.the.BIOS
To.recover.the.BIOS:
1. Turn on the system.
2. Insert the support DVD to the optical drive or the removable device that
contains the BIOS file to the USB port or to the floppy disk drive, if supported.
3. The utility displays the following message and automatically checks the DVD
or removable device for the BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for CD-ROM...
CD-ROM not found!
Checking for USB Device...
When found, the utility reads the BIOS file and starts flashing the corrupted
BIOS file.
Bad BIOS checksum. Starting BIOS recovery...
Checking for USB Device...
USB Device found.
Reading file "MA78TMLE.ROM". Completed.
Start Erasing...\
4. Restart the system after the utility completes the updating process.
•
•
4-6
Before using this utility, rename the BIOS file in the removable device into
MA78TMLE.ROM.
The BIOS file in the support DVD may not be the latest version. Download
the latest BIOS file from the ASUS website at www.asus.com.
The removable devices that ASUS CrashFree BIOS support vary with
motherboard models. For motherboards without the floppy connector,
prepare a USB flash disk before using this utility.
Only the USB flash disk with FAT 32/16 format and single partition can
support ASUS CrashFree BIOS 3. The device size should be smaller than
8GB.
DO NOT shut down or reset the system while updating the BIOS! Doing so
can cause system boot failure!
Chapter 4: BIOS setup