English HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL DCH323, DCH333, DCH334 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data DCH323 DCH333 DCH334 Voltage...
English refrigerators. There is an increased risk of electric shock if will do the job better and safer at the rate for which it your body is earthed or grounded. was designed. c ) Do not expose power tools to rain or wet conditions. b ) Do not use the power tool if the switch does not turn it on and off.
English f ) Do not expose a battery pack or tool to fire or • Never lay the tool down until the bit has come to a complete excessive temperature. Exposure to fire or temperature stop. Moving bits could cause injury. above 130 °C may cause explosion.
English WARNING: Shock hazard. Do not allow any liquid to get electric shock. Removing the battery pack will not reduce inside charger. Electric shock may result. this risk. WARNING: We recommend the use of a residual current NEVER attempt to connect two chargers together. •...
English Do not incinerate the battery pack even if it is severely if the fan does not operate properly or if ventilation slots are • damaged or is completely worn out. The battery pack can blocked. Do not permit foreign objects to enter the interior of the charger.
English Labels on Charger and Battery Pack lithium-ion battery with an energy rating greater than 100 Watt Hours (Wh) will require being shipped as fully regulated Class 9. In addition to the pictographs used in this manual, the labels All lithium-ion batteries have the Watt Hour rating marked on on the charger and the battery pack may show the following the pack.
English 3 Battery packs (T3, X3, Y3) • This product is not intended for use by persons (including children) suffering from diminished physical, sensory or 1 Keyless chuck (DCH334) mental abilities; lack of experience, knowledge or skills 1 Kit box unless they are supervised by a person responsible for their 1 Instruction manual safety.
Page 14
English Inserting and Removing the Battery Pack side of the tool. To store the utility hook push it back flush with the side of the tool. If use of the hook is not desired at all, it can from the Tool (Fig. B) be removed completely.
English To select an operating mode: 4. To replace the keyless chuck with the SDS-Plus bit holder, first remove the keyless chuck the same way as the SDS- 4 1. Depress the mode selector release button Plus bit holder was removed. Then replace the SDS-Plus 2.
English WARNING: To reduce the risk of serious personal • Run the battery pack down completely, then remove it from injury, turn tool off and disconnect battery pack the tool. before making any adjustments or removing/ • Li-Ion cells are recyclable. Take them to your dealer or a installing attachments/accessories or when making local recycling station.
Page 17
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be luxembourg België en luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)
Need help?
Do you have a question about the DCH333NT and is the answer not in the manual?
Questions and answers