Table of Contents
Advertisement
4.
CPU, Power and Chassis fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN)
The fan connectors support cooling fans of a total of 1A~2.2A (26.4W
max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches
the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! DO NOT place jumper caps on the
fan connectors.
Fan Connectors
5.
Digital Audio connector (4-1 pin SPDIF_OUT)
This connector is for the S/PDIF audio module to allow digital sound
output. Connect one end of the S/PDIF audio cable to this connector
and the other end to the S/PDIF module.
Digital Audio Connector
The S/PDIF out module is purchased separately.
4-8
CPU_FAN
CHA_FAN
GND
+12V
CPU FAN IN
CPU FAN PWM
SPDIF_OUT
Chapter 4: Motherboard info
GND
+12V
Rotation
Advertisement
Table of Contents
