Table of Contents
Advertisement
4.
Serial ATA connectors
(7-pin SATA1, SATA2, SATA3)
These connectors are for the Serial ATA signal cables for Serial ATA
hard disk drives.
R
P5B13L
SATA Connectors
When using the connectors in Standard IDE mode, connect the primary
(boot) hard disk drive to the SATA1/2 connector. Refer to the table
below for the recommended SATA hard disk drive connections.
Serial ATA hard disk drive connection
Connector
SATA1/2
SATA3
Connect the right-angle side
of SATA signal cable to SATA
device. Or you may connect
the right-angle side of SATA
cable to the onboard SATA
port to avoid mechanical
conflict with huge graphics
cards.
ASUS T3-P5G965A
SATA1
Color
Setting
Red
Master
Red
GND
SATA3
RSATA_RXN3
RSATA_RXP3
GND
RSATA_TXN3
RSATA_TXP3
GND
SATA2
Boot disk
Slave
Data Disk
right angle side
Use
4-7
Advertisement
Table of Contents
