Table of Contents
Advertisement
3.
IDE connector (40-1 pin PRI_RAID)
This connector is for an 100/66 signal cable. Connect the blue
connector of the signal cable to this connector.
RAID Connector
•
•
4-6
R
P5B13L
Pin 20 on the IDE connector is removed to match the covered hole
on the Ultra DMA cable connector. This prevents incorrect insertion
when you connect the IDE cable.
Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.
PRI_RAID
NOTE: Orient the red markings
(usually zigzag) on the ID
ribbon cable to PIN 1.
Chapter 4: Motherboard Info
Advertisement
Table of Contents
