Connectors; Serial Ata Connectors - Asus P1-P5945GC User Manual

3. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) if you wish to wake up
the computer when you press a key on the keyboard (the default is
the Space Bar). This feature requires an ATX power supply that can
supply at least 1A on the +5VSB lead, and a corresponding setting in
the BIOS.
Keyboard Power Setting
4.4

Connectors

1.

Serial ATA connectors

The connector is for the Serial ATA signal cables for Serial ATA hard
disk drives.
SATA Connectors
Important notes on Serial ATA:
• You must install Windows
Service Pack1 before using Serial ATA hard disk drives.
• When using the connectors in Standard IDE mode, connect the primary
(boot) hard disk drive to the SATA1 connector.
ASUS P1/P2-P5945GC
R
R
2000 Service Pack 4 or the Windows
®
KBPWR
SATA1
GND
RSATA_RXN1
RSATA_RXP1
GND
RSATA_TXN1
RSATA_TXP1
GND
XP
®
4-5