Unpacking; Included Accessories - En-Vision America ScriptAbility Braille RX User Manual

UNPACKING

1
Place your packaged printer on a solid base.
2
Make sure the box is placed with the correct side up.
3
Open the box, lift the printer out of cardboard box and remove remaining packaging tape and material.
4
Remove the printer's two dark plastic top covers:
a.
Remove the thin rearmost cover first by applying a small amount of downward pressure in the
center while lifting on either the left or right ends. The cover should pop off.
b. The larger forward cover can be removed by lifting on the left and right ends simultaneously.
5
Inside, there are two cardboard shipping locks on either side of the print head. Remove them by first
releasing the blue tape, then tipping them towards you and lifting them out.
6
Replace the two dark plastic covers in reverse order by setting them in place and gently pushing down.
It is recommended that you keep the box and all shipping materials in case the unit ever

INCLUDED ACCESSORIES

In addition to the BrailleRx prescription label printer, you will have received:
• (1) USB Cable (1.0; Type A-to-B)
• (1) Power Cable
• (1) Output Shelf
• (1) Printer Stand (assembly required)
needs to be sent in for repairs.
2