En-Vision America ScriptAbility Braille RX User Manual page 13

2
Push the #2 tractor (below) as far from center as it will go, and lock it in place. With the glossy/label
side up, secure the media in the #2 tractor. While unlocked, secure the media in the #1 tractor,
lightly pull the media taut, and lock the tractor in place.
3
Install the Output Shelf so that it sits flat. Push the Shelf's right and left slots onto the printer's pegs
at a low angle. The Shelf's support pegs will rest in the printer's right and left recesses. The Output
Shelf will prevent the label media output from feeding back into the printer.
10