Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nubert nuZeo 3
Summary of Contents for Nubert nuZeo 3
- Page 1 Quickstart Manual EN This manual is available in multiple languages. You can find the latest version in your preferred language here: www.nubert.de/en/downloads DE Die neuesten Bedienungsanleitungen und weitere hilfreiche Informationen finden Sie hier: www.nubert.de/downloads-nuzeo-3...
- Page 2 Nubert product in its entirety. You will be able to set up condensation inside. In consequence of that, there exists danger of any your system without any problems if you read these operating defects or an electric shock.
- Page 3 Sound Adjustment To tailor the speakers‘ sound to your living space or placement, various adjustments can be made using the Nubert X-Remote App (see page 8). Connect the app to the speakers and navigate, depending on your desired setting, to the following menu items: >...
-
Page 4: Signal Connections
3 · 02 / 2025 Signal Connections If the speaker is only supplied with audio signals via wireless (X-Connect or X-Connect Surround), you can skip this step. If you want to supply your speakers with audio signals via cable, the following options are available: XLR (analog balanced) Each speaker is supplied directly with the audio signal (individually). - Page 5 Wireless Pairing with a Preamplifier Excellent wireless stereo solutions can be realized with Nubert devices such as the nuPro X-RW preamplifier, the nuControl X, or the nuConnect ampX integrated amplifier. Traditional preamplifiers can also be connected via cable to a nuConnect trX, which then supplies the active speakers wirelessly.
- Page 6 3 · 02 / 2025 Master-Slave Connection (Stereo Pair) This step is skipped in the following cases: • You have already paired your speakers directly with a preamplifier (Step 5). • You have connected each speaker individually via XLR or AUX cable.
-
Page 7: Factory Reset
02 / 2025 · nuZeo 3 Channel Selection (Stereo pair) Finally, the appropriate channels must be assigned to the speakers. • Start the X-Remote App (see page 8) and connect it to the Master- Speaker or the transmitter. • In the main menu of the app, navigate to > channel config. -
Page 8: Status Led
10 seconds after a configuration change (e.g., volume adjustment or any other interaction), the status LED always reverts to white light. Technical changes and misprints reserved. Our General Terms and Conditions (GTC/AGB) can be found on our website: https://www.nubert.de/en/gtc/ Nubert electronic GmbH E-Mail: info@nubert.de Nubertstr. 1 Hotline: +49 (0)7171 8712-0 73529 Schwäbisch Gmünd...
Need help?
Do you have a question about the nuZeo 3 and is the answer not in the manual?
Questions and answers