• Should the loudspeaker come into contact with liquids or should objects have • Do not operate or store the remote control and battery in locations with high got inside, please unplug the mains plug immediately and contact Nubert elec- humidity or high or low temperature! tronic GmbH (info@nubert.de)!
Page 4
– Stereo jack cinch cable (3.5 mm jack cinch), 1.5 m – Fibre optic cable with TOSLINK plugs, 1.5 m – USB cable (Type A/Type B), 1.5 m nuPro X-3000 loudspeaker with cloth grille SPDIF coaxial cable, 3 m Remote control Stereo jack cinch cable (3.5 mm jack cinch), 1.5 m...
Page 5
Hence our tip: When your new speakers arrive on a cold winter’s • The rear-facing bass reflex ports should be at least 3 centimetres day, just give them a few hours to acclimatise. Your Nubert speak- away from back- and side walls in order to avoid air flow noise.
Page 6
Make sure that all connections to the nuPro loudspeakers are made before switching them on, see also our separate Quick Start Guide. Using the remote control or the Nubert X-Remote App, you can select which of the connected devices you want to hear from the input sources (see page 8).
Page 7
USB Audio device. 2) in Windows settings Manual driver installation under As an alternative to the windows driver, you can download and in- > system stall a suitable driver from https://www.nubert.de/downloads/61/ > sound You can select a playback device. macOS Automatic installation Connect the nuPro X and the computer using the supplied USB cable and turn on the loudspeaker.
Digital Port Nubert X-Remote App As an alternative to the remote control, you can also control the nuPro X-Series speakers with the Nubert X-Remote App, downloadable to your mobile device free of charge via the App Store or Play Store.
Page 9
EN 12/2019 · E12 · nuPro X-3000 Configuring a stereo pair All nuPro X loudspeakers have the same functions and the con- Variation: Cabled connection, right speaker as Master nections. Depending on placement and usage, configure your loud- Connect the two loudspeakers with the supplied SPDIF cable by speakers in one of the following ways.
Page 10
X-3000 · E12 · 12/2019 EN Menu navigation and settings By pressing you can access the different menus and change their settings. Pressing in the volume menu will access the main menu. By pressing you will enter a sub-menu.
Page 11
EN 12/2019 · E12 · nuPro X-3000 MAIN MENU SUB-MENUS These settings allow to select the mode of operation. If you setup single want to configure each loudspeaker individually, select single. < > < > You now have complete access to all configuration options.
Page 12
X-3000 · E12 · 12/2019 EN MAIN MENU SUB-MENUS The advanced main menu, continued from page 11 Here you can recall advanced preset preset 1 a previously saved < > < > < > preset by selecting preset 1, 2 or 3 and confirm with the key.
Page 13
EN 12/2019 · E12 · nuPro X-3000 Construction and technology Tilt Control Auto-off function The midrange/treble adjustment of the nuPro loudspeakers has the The auto on/off function reacts differently, depending on the selected characteristics of a so-called “Tilt control”. While standard treble con- input: If no signal is present at the analog input, the loudspeaker is trols “bend”...
Page 14
X-3000 · E12 · 12/2019 EN Further Applications Adding a subwoofer Use of a single nuPro If your nuPro active speakers are to be used in conjunction with Each nuPro X loudspeaker can play either the left or right channel, a subwoofer, you can connect it to the SUB connector.
Page 15
To change the mode of operation, please see page 11 The tweeters of all Nubert loudspeakers are equipped with a pro- Maximum sampling rates at tective grille so that they can also be wiped off with low pressure. If...
Old appliances can also be returned to us directly in our shops or shipped back to us for disposal. Please send an Email to info@nubert.de for a free return shipping label.
Need help?
Do you have a question about the nuPro X-3000 and is the answer not in the manual?
Questions and answers