California Faucets SB-30K Installation Instructions

SB-30, SB-30F, SB-30K, SB-30T, SB-30X, SB-30XK, SB-30XF, SB-37, SB-37T, SB-37X, SB-37XT,
SB-38, SB-38T, SB-38X, SB-38XT, SB-39, SB-39H, SB-39K, SB-39P, SB-39PI,
SB-39R, SB-39RI, SB-40, SB-40X, SB-45, SB-45X, SB-65, SB-66, SB-74, SB-80,
SB-80W, SB-80WR, SB-80WB, SB-85, SB-85B, SB-85W, SB-C1, SB-C1X, SB-C1XS
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
1
PRIOR TO MOUNTING

Use LEVEL (1) and PENCIL (2) to mark two horizontal
lines 21-7/8" [556mm] top and bottom from each other on
finished wall as shown.

Use KEY (6) and loosen SETSCREW (5) to remove
MOUNT (4) from BAR (3)

Align the two holes from the MOUNT (4) onto the marked
horizontal lines.

Mark the hole locations from the MOUNT and drill the
holes using 3/16" [5mm] bit.

Use LEVEL (1) and repeat for bottom MOUNT location,
ensuring MOUNTS are directly vertical from each other.
2
MOUNTING TO FINISHED WALL

Install ANCHOR (7) into drilled holes and place MOUNT
(4) on wall

Secure MOUNT in place with supplied SCREWS (8)
4
8
3
ATTACHING BAR TO MOUNT

Place BAR (1) onto top & bottom MOUNTS (4)

Secure BAR (1) in place and tighten SETSCREWS (5) using
hex KEY (6)
SB-85_ii_240731
Handshower Slide Bar Installation Instructions
BY A LICENSED PROFESSIONAL
7
Ø3/16" Bit
[5mm]
21-7/8"
[556mm]
SB-85W Shown
Pg 1