Advertisement
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
1
RIGHT OR LEFT HANDED INSTALLATION
The slide bar may be mounted in either a right or left handed
•
position. This is determined at the installation stage by positioning
the handle to the right or left. The slide bar is reversible.
Right-handed
2
MOUNTING TO FINISHED WALL
Pre-drill two 5/16" diameter hole in finished wall as shown **, insert
•
ANCHOR (1) into each drilled hole
Remove screw KNOB (2) and insert SCREW (3) through large hole
•
in bar end post
Securely tighten SCREW (3) and tighten screw KNOB (2) in place
•
www.californiafaucets.com
SB-XX_ii_201104
SB-XX
(XX = Series Handle & Escutcheon for CF Faucets Sets)
Traditional Handshower Slide Bar
Installation Instructions
BY A LICENSED PROFESSIONAL
Left-handed
5271 Argosy Ave. Huntington Beach, CA 92649
** Always verify dimension due
to manufacturing variations
800-822-8855
Pg 1
Advertisement
Table of Contents
Related Manuals for California Faucets SB Series
Summary of Contents for California Faucets SB Series
- Page 1 (XX = Series Handle & Escutcheon for CF Faucets Sets) Traditional Handshower Slide Bar Installation Instructions CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED BY A LICENSED PROFESSIONAL IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
- Page 2 HOLDER OPERATION Note: If hook does not fully retract, rotate hook a small amount to allow hook to fully seat To adjust hook angle, pull hook away from the body • Rotate hook forward or backward to desired position • Release hook to lock into position •...
Need help?
Do you have a question about the SB Series and is the answer not in the manual?
Questions and answers