California Faucets Steampunk Bay TO-85-W Installation Instructions

CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Handle Options
Rough Valves
Single Handle: 50-W-R, 75-W-R, WDV-R, WDV-NS-R, DDV-R
Double Handle: 2-VR
Triple Handle: 3-VR
1
ALIGN & TRIM VALVE STEM
•
Remove mudguard from VALVE (1)
•
To obtain proper HANDLE (8) alignment it may be
necessary to re-align Hot & Cold cartridge STEM
(1b); to align STEM (1b), slightly loosen the
cartridge NUT (1d), place HANDLE (8) on STEM
(1b) and TIGHTEN in CW direction until desired
alignment is achieved; retighten cartridge NUT (1d)
to factory torque setting of 14 ft-lbs.
WARNING: Cartridge NUT (1d) MUST be properly torqued to
prevent possible failure and/or water damage
•
Using a marking device (e.g. pencil or marker)
indicate a distance of 1" from finished wall on ALL-
THREAD (1c); unscrew ALL-THREAD (1c) from
valve STEM (1b)
•
Cut STEM (1b) 1-1/2" from finished wall surface
•
Cut off excess ALL-THREAD (1c) at indicated mark
and reattach ALL-THREAD (1c) onto valve STEM
(1b)
85-HDL_ii_190311
Steampunk Bay
TO-85-W, TO-85B-W, TO-85W-W,
TO-8506L, TO-8506BL, TO-8506WL,
TO-8503L, TO-8503BL, TO-8503WL
Handle Tub or Shower Trim Only
Installation Instructions
BY A LICENSED PROFESSIONAL
TO-85-W
TO-8506L
TO-8503L
TM
TO-85B-W
TO-8506BL
TO-8503BL
8
1-1/2"
1"
TO-85W-W
TO-8506WL
TO-8503WL
13/16"
hex
1c 1d
1b
Pg 1