Related Manuals for Milwaukee M18 F2BC
Summary of Contents for Milwaukee M18 F2BC
- Page 1 OPERATOR'S MANUAL Cat. No. M18 F2BC M18 FUEL™ DUAL BATTERY BRUSHCUTTER/LINE TRIMMER WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
• Remove any adjusting key or wrench before GENERAL POWER TOOL turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. - Page 3 • When battery pack is not in use, keep it away •While operating the machine, always wear long from other metal objects, like paper clips, coins, trousers. Exposed skin increases the likelihood of keys, nails, screws or other small metal objects, injury from thrown objects.
- Page 4 While the blade important information. If unreadable or missing, is binding, never attempt to remove the machine ® contact a MILWAUKEE service facility for a from the material or pull the machine backward replacement.
-
Page 5: Specifications
Wear slip-resistant footwear cause a short circuit. Do not charge non-rechargeable WARNING batteries. SPECIFICATIONS Wear hand protection Cat. No..........M18 F2BC Volts............36 V DC Battery Type ..........M18™ Charger Type..........M18™ Keep hands and feet Recommended Ambient DANGER away from blade Operating Temperature .... -
Page 6: Functional Description
FUNCTIONAL DESCRIPTION 1. Buckle 2. Power head Line trimmer Brushcutter 3. Handles 4. Shaft 5. Line cut-off blade (not shown) 6. Spool release latch 7. Spool housing 8. Eyelet 9. Cutting line 10. Line trimmer guard 11. Brushcutter blade 15.Handlebar adjustment knob 19. - Page 7 3. Rotate the blade 180° and reinstall the screws. Tighten securely. Replacing the Cutting Line ® only MILWAUKEE trimmer line (see Specifications). Replace the cutting line with either 4.5 m of 2.7 mm, 6.1 m of 2.4 mm or 7.6 m x 2.0 mm line.
- Page 8 Do not use blades, brush cutting mount. wheels, accessories, or attachment other than 4. Adjust the harness mount location forward or those recommended by MILWAUKEE ® . Serious back along the shaft until the tool is balanced injury or product damage may occur.
-
Page 9: Operation
4. If a blockage occurs, remove the battery before To unclip the harness: clearing the blockage from the tool. Hold the tool by the shaft with your left hand. Line Trimming 2. Grip the clip with your right hand and 1. -
Page 10: Maintenance
Return the tool, battery packs, and charger to a MILWAUKEE ® service facility for repair. After six months to one year, depending on use,... - Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M18 F2BC and is the answer not in the manual?
Questions and answers