Table of Contents
Advertisement
Mute Function
During an active call pressing either the MUTE soft key on the Handset or the
MUTE key on the Base ( when in speakerphone mode ), will disable the
microphone. Press MUTE key again to return to normal 2-way conversation.
Hold Function
During an active call using the Handset, press the HOLD soft key to
place your call on hold. Press ON (or SPEAKER) to return to the two-
way conversation.
Flash Function
You can use your v 2651 with services such as Call Waiting. Simply press the
ON key on the Handset to flash the line. Using the Base Speakerphone, press
the FLASH key.
Volume Control
From the Handset:
During an active call, press the VOL soft key, then use the
adjust the earpiece (or Handset Speaker) volume.
Notice the change in the display graph as you adjust the volume. An increase
in volume will be represented by an increase in shaded area on the graph. A
decrease in volume will result in a reduction of the shaded area.
Handset and Base Operation
Press OK to confirm your setting.
From the Base:
During an active call, press the
VOLUME
speakerphone volume. You will hear
a special tone when you reach the
highest or lowest setting.
and
soft keys to
keys to adjust the
Advertisement
Table of Contents
