Table of Contents
Advertisement
The Handset of your v 2651 cordless telephone is powered by a
rechargeable battery pack. It charges automatically whenever the Handset is
in the Base Unit. Maximum talk time on a full charge is 7.5 hours. Maximum standby
time is over 5 days.
You should charge the battery pack for 12 hours when you first receive your
phone. You'll know the battery pack needs charging when:
•
The low battery message is displayed :
•
The handset seems completely dead,
the LCD is completely clear and does
not activate when you press the keys.
IMPORTANT:
.
1
Do not dispose of a battery pack in a fire, the cell may explode.
.
2
Do not open or mutilate the battery pack. Toxic substances may be released,
causing harm to eyes or skin.
.
3
Exercise care in handling battery packs in order to prevent an accidental
short of the charge contacts, potentially causing the battery pack to overheat.
.
4
Do not dispose of this battery pack into household garbage. For information
concerning proper battery recycling or disposal, please contact your local
Recycling Center or Disposal Service.
Connecting to phone line
Plug one end of the telephone line cord into the jack on the back of the Base
unit. Plug the other end of this cord into the wall telephone jack.
Checking for dial tone
After the battery is charged press ON on the Handset. The Phone icon
appear on the handset display, and you will hear dial tone. If not, see In Case
of Difficulty.
Charging Of Handset Battery Pack
will
Advertisement
Table of Contents
