Nice NX STAR MT AUTOTRQ 3017 SH Instructions And Warnings For Installation And Use
Tubular motor
Hide thumbs
Also See for NX STAR MT AUTOTRQ 3017 SH:
- Instructions and warnings for installation and use (40 pages) ,
- Quick manual (2 pages) ,
- Quick manual (2 pages)
Subscribe to Our Youtube Channel
Related Manuals for Nice NX STAR MT AUTOTRQ 3017 SH
Summary of Contents for Nice NX STAR MT AUTOTRQ 3017 SH
- Page 1 Next Star MT NX STAR MT AUTOTRQ 3017 SH Tubular Motor EN - Instructions and warnings for installation and use...
-
Page 2: Installation Warnings
GENERAL WARNINGS: SAFETY - INSTALLATION - USE (original instructions in Italian) ATTENTION Important safety instructions. Follow all instructions as improper installation may cause serious damage ATTENTION Important safety instructions. It is important for you to comply with these instructions for your own and other people’s safety. -
Page 3: Product Description And Intended Use
• is equipped with a “thermal protection device” which, in case of extended use, pro- in the Nice Product Catalogue – www.niceforyou.com). In particular, do not in- tect the motor against excessive overheating by limiting the motor speed to the min- stall the product if its motor torque is lower than that needed to move your imum speed;... -
Page 4: Programming And Adjustments
3-h) and allows the replacement of the cable (refer to the “Nice Screen” product To assemble and install the motor, refer to fig. 3. Moreover, consult the Nice product catalogue, also available on the website www.niceforyou.com). - Page 5 Support for fixing the motor head. Cap for fixing the roller to the bracket (not included). Removing the connector if necessary 10 mm English – 4...
- Page 6 4.1.1 - Report messages sent by the motor a number followed by the symbol – The electronic system that controls the awning’s movement at all times can auto- The motor repeats the report message on the status of the installation by performing matically stop the motor when the awning reaches a certain position (or “height”) some brief movements when a movement is commanded.
- Page 7 A.2 - AUTOMATIC programming of the UPPER limit switch (“0”) and MANUAL programming of the LOWER limit switch (“1”) NOTES AND WARNINGS • Use this procedure solely for awnings with mechanical Up “0” limit switch stop. • Programme the UP limit switch (0) FIRST. •...
- Page 8 A.4 - “FRT” Function: automatic tensioning of the canvas when opening awnings that are not fitted with a mechanism to lock the awning when opening • This function is useful to eliminate the unsightly depression of the canvas that may form when the awning is open. It is activated by programming position “2” near the limit switch “1”.
- Page 9 A.5 - Adjusting the motor speed NOTES AND WARNINGS • This procedure can be used to vary the rotation speed of the motor by choosing between five levels. • Warning! – Before carrying out the procedure, check that the awning is not at the low end stop ‘1’. ...
- Page 10 A.7 - TOTAL or PARTIAL deletion of memory A.7.1 - TOTAL memory deletion NOTES AND WARNINGS • If during the execution of the procedure you choose the option “5 presses = clear ALL MEMORY”, the system restores the factory settings by clearing the “0” and “1”...
- Page 11 In general, the motors in the “NEXT” line were designed for residential use and there- 20° C (± 5° C). • Nice S.p.A. reserves the right to apply modifications to products fore for discontinuous use. The motor is designed for residential use, in other words, at any time when deemed necessary, maintaining the same intended use and func- for intermittent service.
- Page 12 Nice SpA Oderzo TV Italia www.niceforyou.com info@niceforyou.com...
Need help?
Do you have a question about the NX STAR MT AUTOTRQ 3017 SH and is the answer not in the manual?
Questions and answers