HONITURE X7 Manual

Know Your Product

Charging

• Please turn off the power before charging
• Please fully charge the battery before use
• Please charge the battery at least once every three months.
• Please be sure to use the charger included in the box, other chargers may damage the battery.

Charging Method

1. Connect the Main Body to Charge
   
2. Wall Mount Charging directly
   
3. Charge the Battery Separately
   

Install Charging Wall Mount

Operating

• Before first time use, ensure the vacuum cleaner has been charged 4-5hours.
• Do not exceed the MAX dust collection capacity of the dust cup.
• Please keep the suction nozzle unobstructed and avoid blockage, otherwise the motor will overheat and cause danger.

Pressing the ON/OFF button to start work

Do not use the Cordless Vacuum cleaner without the removable filter or dust bin not in position.

Select Cleaning Mode

• There are three suction modes: ECO<MID<MAX.
• Press the "" to adjust suction mode.
• Press the "" once to switch to MAX Mode, twice to switch to ECO Mode.

Abnormal Indicator

• The battery level indicator blinks red, indicating that the battery level is below 10%. The vacuum cleaner should be charged as soon as possible.
• The LED on the motorized brush is off and the red brush roll indicator keeps flashing, indicating that the brush roll is locked. Please check and clean immediately.
• The red curved arrow light blinks for 10 seconds, indicating a clogged main unit, dust cup or duct. Please check and clean immediately.

Cleaning

Clean the Main Body

• Turn off the power before cleaning the main unit.
• Please use a neutral detergent, wipe the body with half-wet cloth.
• Please avoid sun exposure and store in a cool and dry place.

Empty the Dust Cup

• Press the dust empty button to empty the dust cup.
• When using, if the garbage in the dust cup exceeds MAX line, please empty it in time.

Remove Dust Cup and Filter

Remove the dust cup by pressing and holding the dust cup release buttons on the left and right sides of the handle.

Clean the Filter

HEPA filters and dust cups are washable. Make sure they are thoroughly dry before use.

Clean the Brush Roller

• Take out the roller brush.
• Remove any hair of fibres that have been wrapped around it. Using the mini cleaning brush to clean it.

You can clean it with or without water. Please remember to use the roller after it is completely dry.

• Assemble the roller brush.

Maintenance

• Clean the appliance only with a soft, slight damp cloth. Do not allow any liquid substances to enter the appliance.
• The filter can be cleaned with warm water. It must be completely dried before putting it back into use. Do not immerse the main unit in water or any liquid.
• Do not use ant corrosive chemicals or abrasives.
• It is recommended to change the HEPA filter every 2 months to ensure optimum performance. Do not use the filter when it is damaged or worn out.
• Only the original charger and battery can be used to the appliance.

Warranty

If there is any problems or malfunction during use, please send your question and order number to our email. We will provide you a good after-sales service within 24 hours.

Email our Customer Service

support-US@honiture.com

HONITURE is here to help, and we are glad to service you.