Optimum 9400 3RD GENERATION User Manual page 5

electrical components. Never put the blender base into any liquid or water. If the appliance is
humid or wet, unplug it immediately to avoid electrical shock.
14. Thoroughly clean all parts that will come into contact with food before you use the Optimum
9400 3rd Generation for the first time. Cleaning instructions can be found in the cleaning and
maintenance section.
SAFETY FIRST
15. Use warm water and mild detergents to clean all parts which come into direct contact with
ingredients after every use. Do not use abrasive materials, harsh cleaners or corrosive liquids
(e.g. acids, acetone, etc.) to clean the blender.
16. Do not use a water jet machine to clean the blender. Please refer to the cleaning and
maintenance section for proper instructions.
17. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
18. Dropping the Optimum 9400 3rd Generation or allowing it to fall can seriously damage it.
Place it on a stable, flat surface like a bench or table and ensure that it is at a safe distance
from the edge to avoid falling.
19. Always ensure the cushion pad is securely in place before operating the blender.
20. Before operating, ensure the blade assembly cog and drive socket are properly aligned and
connected. If not, remove the blender jug and try again.
21. The blender jug must be placed flat on the blender base before use. Before starting, make
sure the blender jug is securely in position.
22. Always use the blender with the lid securely in place.
23. Do not place ingredients above 95°C into the blender jug, as temperatures above this may
cause the jug to melt.
24. Avoid adding boiling water or liquids to the blender jug.
25. Avoid blending carbonated liquids, as this may cause injury.
26. To prevent overflowing, never fill the jug past the max fill line. If it overflows, remove some
ingredients until it's below the max fill line and resume blending. Do not operate the blender if
it is overflowing.
27. Avoid coming into contact with moving parts.
28. If the Optimum 9400 3rd Generation stops unexpectedly or appears to malfunction, switch o
the power supply, unplug it from power and stop using it immediately. Seek professional
advice from the manufacturer, its service agent or a similarly qualified person to identify the
fault and make any repairs.
29. After using the blender at maximum speed, allow a 5 minute cooling period before starting
another cycle at maximum speed. After two cycles, let the blender cool down for 15-30
minutes to return to a safe operating temperature.
30. Avoid touching the blade assembly cog or drive socket after blending, as they may be hot.
31. In order to ensure your children's safety, please keep all packaging, plastic bags, boxes,
polystyrene out of their reach. CAUTION: Do not allow small children to play with the plastic as
there is a danger of su ocation.
32. When using the blender, the Optimum 9400 3rd Generation can be used by children aged 8
years and above if they have been given supervision or instruction concerning the use of the
appliance in a safe way and if they understand the hazards involved. Cleaning and user
maintenance shall not be made by children unless they are aged 8 years and above and are
supervised. Keep the blender and its cord out of reach of children aged less than 8 years.
33. The Optimum 9400 3rd Generation is not intended for use by personnel with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are
supervised or have been given instruction concerning the use of the blender by a person
responsible for their safety and they understand the hazards involved.
34. Do not interfere with any safety micro switches.
35. Do not operate the Optimum 9400 3rd Generation unattended or near edge of work surface.
36. Do not place hands, fingers or utensils in the blender jug of the Optimum 9400 3rd Generation
unless the blender is unplugged from power and the motor has come to a complete stop.
37. To avoid personal injury, never use hands or fingers to remove ingredients from the blender jug.
38. The use of attachments not recommended by Optimum may cause fire, electrical shock or injury.
39. Do not use an extension cord.
40. When using the Optimum 9400 3rd Generation, never operate the blender continuously for
more than 7 minutes.
41. Use the Optimum 9400 3rd Generation only for its intended function.
42. If the Optimum 9400 3rd Generation does not work properly, unplug it immediately and
contact after sales support.
3