Cleaning And Maintenance - Optimum 9400 3RD GENERATION User Manual

CLEANING AND MAINTENANCE

Always clean your Optimum 9400 3rd Generation after each use to maintain its hygiene and longevity.
Leaving food in the blender can lead to bacteria growth and may cause staining to the blender jug.
To clean the blender base:
1. Switch o and unplug the blender from the outlet.
2. Wipe the cushion pad and surfaces of the blender base with a soft, damp cloth. If needed, use a mild
detergent to remove any dried food. Never immerse the motor base in water or any other liquids.
3. Thoroughly dry the blender base with a clean, soft cloth.
To clean the blending jug:
1. After each use, rinse the blending jug thoroughly with warm, soapy water. Be sure to keep the
underside of the jug dry to prevent water damage to the blade assembly.
2. Add one to two drops of dish soap to the jug and fill it halfway with warm water.
3. Secure the lid and lid insert, then place the blending jug on the blender base.
4. Start the blender at low speed 1 and gradually increase to speed 5.
5. Let it run on speed 5 for 10-60 seconds, depending on the thickness of the contents, as thicker-
blends may need longer to clean.
6. Pour out the soapy water and rinse thoroughly.
7. Turn the blending jug upside down and allow it to air dry.
To deep clean the blending jug:
1. Fill the blending jug with 2 cups of cool water and 2 cups of white vinegar.
2. Let it soak for 8-12 hours.
3. Pour out the solution and rinse the blending jug thoroughly.
4. Follow the standard blending jug cleaning steps to finish cleaning the blending jug.
IMPORTANT:
IMPORTANT:
RINSE IT UPSIDE DOWN AS THIS WILL CAUSE IRREVERSIBLE DAMAGE
DO NOT PLACE THE BLENDING JUG, LID, LID INSERT
OR TAMPER TOOL INTO THE DISHWASHER.
DO NOT SUBMERGE THE JUG IN WATER OR PRESSURE
TO THE BLADE ASSEMBLY BEARINGS.
11