Optimum 9400 3RD GENERATION User Manual page 4

SAFETY FIRST
Before using the Optimum 9400 3rd Generation, please read these instructions thoroughly. Be
sure to keep the instructions, warranty, receipt, original box and packaging. If you pass this
appliance on to someone else, remember to include this user manual and store these instruc-
tions for future reference.
1. Check if the voltage indicated on the Optimum 9400 3rd Generation corresponds to the local
mains voltage before you connect the appliance.
2. Only connect the appliance to an earthed power socket. Always make sure that the power
plug is inserted into the power socket properly.
3. Appliances can be dangerous if they are used incorrectly. Please ensure that anyone who
uses the Optimum 9400 3rd Generation clearly understands how to operate it safely to avoid
potential hazards.
4. The Optimum 9400 3rd Generation is not a toy. Do not allow children to use it and keep it and
the cord that comes with it out of their reach.
5. Switch o the Optimum 9400 3rd Generation and disconnect it from any power supply when
not in use.
6. When cleaning or putting it away, or if the Optimum 9400 3rd Generation is not being used,
switch o the appliance and always pull out the plug from the socket and not the cable.
7. Do not operate the Optimum 9400 3rd Generation without supervision. If you should leave the
workstation, always switch the Optimum 9400 3rd Generation o or remove the plug from the
socket.
8. Check the Optimum 9400 3rd Generation and the cord for damage on a regular basis. Do not
use the appliance if it is damaged. Do not try to repair the appliance on your own. Always
contact an authorised technician. If the cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to avoid a hazard.
9. Any damage to components, including the start/stop switch, variable speed dial, pulse switch,
cushion pad, drive socket, blade assembly, base plate, jug shell, lid, lid insert and tamper tool,
can make the appliance less safe to use. Regularly check all components for damage or
cracks and if you find something wrong, stop using the appliance and contact after sales
support.
10. Parts and accessories, other than those supplied with the Optimum 9400 3rd Generation,
should not be used when operating the appliance. Misuse may damage the appliance and
void the warranty.
11. Do not use the Optimum 9400 3rd Generation outdoors.
12. Keep the Optimum 9400 3rd Generation away from sources of heat, direct sunlight, humidity
and sharp edges.
13. Do not use the Optimum 9400 3rd Generation with wet hands or bare feet, as it contains
electrical components. Never put the blender base into any liquid or water. If the appliance is
humid or wet, unplug it immediately to avoid electrical shock.
14. Thoroughly clean all parts that will come into contact with food before you use the Optimum
9400 3rd Generation for the first time. Cleaning instructions can be found in the cleaning and
maintenance section.
15. Use warm water and mild detergents to clean all parts which come into direct contact with
ingredients after every use. Do not use abrasive materials, harsh cleaners or corrosive liquids
(e.g. acids, acetone, etc.) to clean the blender.
16. Do not use a water jet machine to clean the blender. Please refer to the cleaning and
maintenance section for proper instructions.
17. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
2