Schwinn 190 Quick Start Manual

3/11/24, 3:09 PM
Schwinn 190 & 290 Bikes: Console constantly cycles through program
screens
Common issue descriptions:
Console demo mode
Machine behaves or acts like a floor/display model
Console won't stop cycling through program screens
Can't select or start a workout
Tools used in this guide: -
Estimated time to complete:
Let's get started!
We will check the components below to determine which is causing the issue.
1.
Schwinn logo on the console
Turn off Console Demonstration mode
Tools Required:
None
1.
Console Demonstration mode is enabled when the console continuously cycles through
programs and does not allow you to begin a workout.
2.
To exit Demonstration mode, press and hold the Schwinn™ logo button for three seconds.
3.
The settings will update the next time the machine goes to sleep [15878.A].
Need additional assistance?
1 Customer Care Contact Information
Please contact Customer Care at
Some replacement parts may also be available for purchase
A list of part numbers referenced within this guide can be located at the bottom of this page.
Customer Care - Hours of Operation:
Monday - Friday 6:00am - 5:00pm PST
The replacement part will be provided to you at no cost assuming your machine meets the warranty eligibility
requirements. A Customer Care Agent will be able to assess your current warranty eligibility and provide you with your
options.
Please note that if you did not purchase your machine directly from BowFlex, Schwinn, or Nautilus, we will need a copy
of your purchase receipt in order to register your machine for warranty.
about:blank
Schwinn 190 & 290 Bikes:  Console constantly cycles through program screens
None -
Less than 5 minutes
Estimated Time to Complete:
Less than 5 minutes
1-800-605-3369 for additional help or to order replacement parts.
online here.
ID: 15878.1
Step 2
1/2