Wen MM1213 Instruction Manual
  1. Manuals
  2. Brands
  3. Wen Manuals
  4. Saw
  5. MM1213
  6. Instruction manual
Wen MM1213 Instruction Manual

Wen MM1213 Instruction Manual

12-inch slide compound miter saw
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MODEL MM1213
12-INCH SLIDE
COMPOUND MITER SAW
Instruction Manual
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
1-847-429-9263 (M-F 8AM-5PM CST)
TECHSUPPORT@WENPRODUCTS.COM
IMPORTANT: Your new tool has been engineered and manufactured to WEN's highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
WENPRODUCTS.COM
For replacement parts and the most up-to-date instruction manuals, visit

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MM1213 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wen MM1213

Summary of Contents for Wen MM1213

  • Page 1 1-847-429-9263 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

  • Page 2: Table Of Contents

    Troubleshooting Guide ................... 23 Exploded View & Parts List ................25 Warranty Statement ..................29 WENPRODUCTS.COM To purchase accessories and replacement parts for your tool, visit Replacement Miter Saw Blades (Model BL1248) Replacement Carbon Brushes (Part MM1213-223) Miter Saw Stand (Model MSA200, MSA750T, MSA330)

  • Page 3: Welcome

    INTRODUCTION Thanks for purchasing the WEN Miter Saw. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool.

  • Page 4: Safety

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 5: California Proposition 65 Warning

    GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  • Page 6: Saw Blade Safety

    MITER SAW SAFETY WARNINGS WARNING! Do not operate the miter saw until you have read and understood the following instructions and the warning labels. SAW BLADE SAFETY 4. Wear work gloves when handling saw blades. DO NOT wear gloves while operating the saw. 1.

  • Page 7: Laser Safety

    MITER SAW SAFETY WARNINGS WARNING! Do not operate the miter saw until you have read and understood the following instructions and the warning labels. SECURE YOUR WORKPIECE 6. During slide cutting, always push the saw blade away from you. Do not pull the saw towards you. 1.

  • Page 8: Double-Insulated Tools

    ELECTRICAL INFORMATION DOUBLE-INSULATED TOOLS The tool’s electrical system is double insulated where two systems of insulation are provided. This eliminates the need for the usual three-wire grounded power cord. Double insulated tools do not need to be grounded, nor should a means for grounding be added to the product. All exposed metal parts are isolated from the internal metal motor components with protecting insulation.

  • Page 9: Packing List

    UNPACKING & TRANSPORTATION UNPACKING With the help of a friend or trustworthy foe, carefully remove the miter saw from the packaging. Make sure to take out all contents and accessories. Do not discard the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and accessories.

  • Page 10: Know Your Miter Saw

    KNOW YOUR MITER SAW Safety Lock Handle Handle Carbon Brush Cover Motor Blade Cover Workpiece Clamp Adjustable Fence Bevel Angle Scale Fixed Fence Clamp Locking Knob Extension Table Miter Angle Indicator Kerf Board Miter Lock Knob Miter Stop Lever Power Trigger Laser Switch Dust Port Handle...

  • Page 11: Installing The Blade

    ASSEMBLY & ADJUSTMENTS WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your miter saw. Failure to follow the safety instructions may result in serious personal injury. INSTALLING THE MITER LOCK KNOB Fig.

  • Page 12: Guard Operation

    ASSEMBLY & ADJUSTMENTS GUARD OPERATION NOTE: Keep hands clear of the blade when the operating handle is lowered. Do not interfere with the proper move- ment of the blade guard. When the handle is lowered, the blade guard raises automatically. When the handle is raised, the blade guard returns to its safety position, covering the blade.

  • Page 13: Adjusting The Miter Angle

    ASSEMBLY & ADJUSTMENTS WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your miter saw. Failure to follow the safety instructions may result in serious personal injury. SETTING UP ARM SLIDE Fig.

  • Page 14: Bench Mounting

    The miter saw has four holes on the base for bench mount- ing (Fig. 10). Mount and fix the saw to a level, horizontal bench, worktable, or miter saw stand (compatible with WEN Fig. 10 models MSA200, MSA330, and MSA750T) using four bolts and nuts (not included).
  • Page 15 ASSEMBLY & ADJUSTMENTS SQUARING THE FENCE WITH THE BLADE Fig. 12 To make accurate cuts, the fence must be perpendicular to the saw blade. 1. Lower the saw arm down to the lower position and lock the release pin. 2. Slide the saw arm to the back and tighten the slide lock knob.
  • Page 16 ASSEMBLY & ADJUSTMENTS SQUARING THE TABLE WITH THE BLADE Fig. 15 To make accurate cuts, the table must be perpendicular to the saw blade. 1. Lower the saw arm down to the lower position and lock the release bolt. 2. Slide the saw arm to the back and tighten the slide lock knob.

  • Page 17: Adjusting The Cutting Depth

    ASSEMBLY & ADJUSTMENTS ADJUSTING THE CUTTING DEPTH Fig. 18 The saw cutting depth can be adjusted if you would like to perform a kerfing or rabbet cut that does not cut all the way through the workpiece. 1. Unplug the tool from its power source and raise the saw head assembly.

  • Page 18: Changing The Saw Blade

    ASSEMBLY & ADJUSTMENTS CHANGING THE SAW BLADE Fig. 20 DANGER! Never try to use a blade larger than the stated ca- pacity of the saw. Do not use a blade thicker than 1.8mm. It will prevent the blade screw from properly securing the blade on the spindle.

  • Page 19: Operation & Maintenance

    OPERATION WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your tool. Failure to follow the safety instructions may result in serious personal injury. WARNING! Before operating the miter saw, make sure to equip yourself with a dust mask, ear protection, and safety glasses for protection from possible injuries.

  • Page 20: Check Before Operation

    OPERATION WARNING! Do not plug in or turn on the tool until it is fully assembled according to the instructions. Read through and become familiarized with the following procedures of handling and adjusting your tool. Failure to follow the safety instructions may result in serious personal injury. WARNING! Before operating the miter saw, make sure to equip yourself with a dust mask, ear protection, and safety glasses for protection from possible injuries.
  • Page 21 OPERATION 7. PERFORM THE CUT Fig. 26 1. Plug in the miter saw. Turn on the laser power switch (Fig. 26 - 1) to see where your cut will land on the material. CAUTION: DO NOT look into the laser light or point it at any living thing.

  • Page 22: Routine Inspection

    WARNING! Any attempt to repair or replace electrical parts on this tool may be hazardous. Servicing of the tool must be performed by a qualified technician. When servicing, use only identical WEN replacement parts. Use of other parts may be hazardous or induce product failure.

  • Page 23: Product Disposal

    MAINTENANCE PRODUCT DISPOSAL Used power tools should not be disposed of together with household waste. This product contains electronic com- ponents that should be recycled. Please take this product to your local recycling facility for responsible disposal and to minimize its environmental impact. Please recycle the packaging and electronic components where facilities exist.
  • Page 24 TROUBLESHOOTING GUIDE WARNING! Stop using the tool immediately if any of the following problems occur. Repairs and replacements should only be performed by an authorized technician. For any questions, please contact our customer service at 1-847-429-9263, M-F 8-5 CST or email us at techsupport@wenproducts.com. PROBLEM CAUSE SOLUTION...

  • Page 25: Exploded View & Parts List

    EXPLODED VIEW & PARTS LIST NOTE: Not all parts may be available for purchase. Parts and accessories that wear down over the course of normal use are not covered under the warranty.
  • Page 26 EXPLODED VIEW & PARTS LIST Part. No. Description Qty. Part. No. Description Qty. MM1213-002 Hex Bolt, M10x40 MM1213-046ASM Miter Knob MM1014-035 Screw Knob, M6x40 MM1213-047 Miter Locking Rod Phillips-Head Screw, Center Slotted Nut, MM1213-005 MM1213-048 M4x10 M10x20 MM1213-006 Rear Support...
  • Page 27 EXPLODED VIEW & PARTS LIST Part. No. Description Qty. Part. No. Description Qty. Phillips Head Screw, MM1213-138 Terminal Box Cover MM1213-089 M4x14 MM1014-177 Wiring Terminal MM1213-090 Arbor Bolt, M8x20 MM1213-140 Terminal Box MM1213-091 Outer Flange MM1213-141 Screw Knob, M6x50 N.P.
  • Page 28 EXPLODED VIEW & PARTS LIST Part. No. Description Qty. Part. No. Description Qty. MM1213-236 Tension Spring MM1213-305 Laser Housing MM1213-237 Stator Phillips Head Screw, MM1213-167 M4x12 Self-tapping Screw, MM1213-238 ST5x65 MM1213-306 Laser Cover MM1213-239 Rotor MM1213-307 MM1213-240 Dust Cover MM1213-308...

  • Page 29: Warranty Statement

    WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
  • Page 30 NOTES...
  • Page 31 NOTES...
  • Page 32 THANKS FOR REMEMBERING V. 2024.01.10...

Table of Contents