Using Your Phone During A Power Failure; Using The Answering System; Answering System Options (Ans. Setup) - Uniden D1688 User Manual

Using Your Phone During a Power Failure

If there is a power failure, you can still make and receive phone calls using
the base corded handset, including Call Waiting calls and changing the
earpiece volume. All other features of the base and all cordless handsets
will not function.
#
While the power is out, the base uses a special ringer; you cannot
adjust the volume of this ringer.

USING THE ANSWERING SYSTEM

Answering System Options
You can set or change the answering system options from any station. Just
open the menu and select
Submenu
Security Code
Ring Time
Record Time
Message Alert
Ans. Language
Call Screen
Ans. On/Off
Record Greeting
Greeting
Options
Ans. Setup. Select one of the submenus:
Purpose
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 20).
Set the number of rings (2, 4, or 6) before the system
answers. If you call in remotely to check your messages,
Toll Saver makes the system answer after 2 rings if you
have new messages or after 4 rings if you don't.
Set the amount of time
leave a message. Choose
want the system to let callers leave a message.
Have the base beep every 15 seconds when you have a
new message. The alert stops after you listen to all your
new messages or if you press any key on the base.
Change the language of the system's voice prompts.
Turn on Call Screen feature (see page 19).
Turn your answering system on or off.
You can also press
Record an outgoing message or greeting (see below).
Switch greetings or delete your greeting (see below).
(Ans.
Setup)
(1 or 4 minutes) callers have to
Announce Only
Ans on/off on the base.
if you don't
English - 17