Uniden D1660 User Manual page 17

Audio issues
There's a lot of
noise or static on
the line
Caller ID problems
No handsets display
Caller ID information.
Caller ID displays briefly
and then clears.
Multi-handset problems
I can't transfer calls.
Two handsets can't talk to a caller. x See if any handset is in Privacy Mode.
A handset says Unavailable.
I can't register a new handset.
Answering system problems Possible solutions
The answering system does
not work.
The system won't record
messages.
A handset can't access the
answering system.
My outgoing message is gone.
I can't hear the base speaker.
Messages are incomplete.
The system keeps recording
when I answer on an
extension.
Possible solutions
x Check for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors,
WiFi equipment, etc.). Move the handset or base away
from the interference source.
x If you use a telecoil hearing aid, turn on T-coil mode
(see p. 7).
x If you have any service that uses the phone line, add a
DSL or telephone line filter (see p. 18).
Possible solutions
x Let calls ring twice before answering.
x Make sure your Caller ID service is active.
x You may have to change the line mode.
Contact Customer Service for instructions.
x Make sure the answering system is on.
x Make sure the base is plugged in.
x See if
x Delete messages (memory may be full).
x See if another handset is using the system.
x Make sure the phone is in standby.
x If there was a power failure, re-record
your personal outgoing message.
x Make sure call screening is turned on.
x Change the base speaker volume.
x Increase the
x Delete messages (memory may be full).
x You may have to change the line
mode. Contact Customer Service for
instructions.
Possible solutions
x Reset the handset (see p. 18).
x Move the handset closer to the base.
x See if any handset is in Privacy Mode.
x Reset the handset (see p. 18).
x See if you have 12 registered handsets.
Record Time is set to
Record
Announce Only.
Time.
17