Multihandset Features - Uniden D1660 User Manual

3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
#
If the phone is in silent mode and you turn off the answering
system, the phone exits silent mode.

Multihandset Features

#
To use the features in this section, you need at least 2 handsets.
♦ Your base supports a total of 12 cordless handsets: the one that came
with the base and up to 11 DCX160 accessory handsets.
♦ You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
♦ Handsets that aren't registered display a Not Registered message. For
registration instructions, see p. 18, or see the accessory handset manual.
♦ If a handset was ever registered to a base, you must reset it before it can
register to a new base; see p. 18, or see the accessory handset manual.
Conference Calling
♦ When an outside call comes in, two handsets can join in a conference
call with the outside caller.
♦ To join a call that's already in progress, just press
♦ To leave the conference call, hang up normally; the other handset
remains connected to the call.
Call Transfer
To...
transfer a call
cancel a transfer
accept a
transferred call
Privacy Mode
To activate privacy mode on a call in progress, press
As long as privacy mode is on, you'll see a
handsets can join your call. Privacy mode turns off automatically when
you hang up; you can also turn it off by pressing
Press...
inTErcoM/clEar . The phone puts the call on hold and
prompts you to select the handset you want to page.
When the other handset accepts the call, you'll be
disconnected (press
Talk/Flash to return to the call.
inTErcoM/clEar to answer the page and speak to the other
handset. Then, press
# again.
Talk/Flash
Talk/Flash to rejoin the call).
Talk/Flash to speak to the caller.
MEnu/sElEcT
in the display, and no other
MEnu/sElEcT
or .
sPEakEr
twice.
twice.
11