KGEAR GF42I User Manual

GF42 I- GF42T I- GF42A I
4x2" Line Array Column Speaker - Passive - Passive With Transformer - Active
66mm
60mm
2,6in
2,4in
Thank you for choosing KGEAR!
To ensure proper operation, please carefully read this
owner's manual and safety instruction before using the
product. After reading this manual, be sure to keep it for
future reference. If you have any questions about your
new device please contact K-array customer service at
info@kgear.it or contact the local distributor in your
country.
GF42 I, GF42T I, GF42A I are the smallest and
minimalist line array elements of the GF family in a
practical and compact column format and resistant
frame. The GF42 I, GF42T I and GF42A I comprise 4x 2"
ferrite magnet woofers closely-spaced into a recycled
ABS enclosure, featuring PAT (Pure Array Technology).
These columns speakers are the perfect solution
for speech reproduction with high definition and
intelligibility, thanks to their directivity and a narrow
vertical dispersion, as well as music reproduction
when coupled with a KGEAR subwoofer.
GF42 I is a 100W line array element with selectable
impedance: low Z - 16 Ω / high Z- 64 Ω.
GF42T I has the feature of an internal transformer
and it is compatible high voltage lines at 70V or 100V
and has different power taps: 4/8/16/32 W @ 100V or
2/4/8/16 W @ 70V.
GF42A I is an active speaker with a built-in amplifier
module with a balanced line input, a mute contact and
an auto ON-OFF switch with selectable thresholds,
plus a speaker output to connect another KGEAR
speaker or passive subwoofer from KGEAR GS family.
28mm
1,1in
35mm
1,4in
Unpacking
Each KGEAR device is inspected before leaving the
factory. Upon arrival, carefully inspect the shipping
carton, then examine and test your new device. If
you find any damage, immediately notify the shipping
company. Check that the following parts are supplied
with the product:
• 1 x GF42 I - (GF42A I or GF42T I) line array column
speaker
• 1x Phoenix connectors x GF42 I
• 2x Phoenix connectors x GF42A I
• 1x Phoenix connectors x GF42T I (Euroblock
1,5/ 4-ST-3,81 or 1,5/ 5-ST-3,81 ) with dedicated
jumpers to select impedance.
• 2 x Wall mount L-brackets + screws and covers.
x2
USER GUIDE
Rear Panel GF42 I
GF42 I passive speaker is equipped with 1x Phoenix
connector 4 pin - Euroblock 1,5/ 4-ST-3,81.
35mm
1,4in
1
2
3
4